[PATCH v1 0/2] SPI-NOR add NPCM FIU controller driver

[Tomer Maimon]

This patch set adds Flash Interface Unit(FIU) SPI-NOR
support for the Nuvoton NPCM Baseboard Management 
Controller (BMC).
    
The FIU supports single, dual or quad communication interface.
    
the FIU controller can operate in following modes:
- User Mode Access(UMA): provides flash access by using an
  indirect address/data mechanism.
- direct rd/wr mode: maps the flash memory into the core
  address space.
- SPI-X mode: used for an expansion bus to an ASIC or CPLD.

The NPCM750/730/715/710 supports up to three FIU devices:
- FIU0 supports two chip select.
- FIU3 supports four chip select.
- FIUX supports two chip select.

The NPCM FIU driver tested on NPCM750 evaluation board.

Tomer Maimon (2):
  dt-binding: mtd: add NPCM FIU controller
  mtd: spi-nor: add NPCM FIU controller driver

 Documentation/devicetree/bindings/mtd/npcm-fiu.txt |  64 ++
 drivers/mtd/spi-nor/Kconfig                        |   8 +
 drivers/mtd/spi-nor/Makefile                       |   1 +
 drivers/mtd/spi-nor/npcm-fiu.c                     | 930 +++++++++++++++++++++
 4 files changed, 1003 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/npcm-fiu.txt
 create mode 100644 drivers/mtd/spi-nor/npcm-fiu.c

-- 
2.14.1