RE: [PATCH V6 0/9] clk: add imx7ulp clk support

From: Aisheng DONG
Date: Mon Dec 03 2018 - 20:30:28 EST


> -----Original Message-----
> From: Stephen Boyd [mailto:sboyd@xxxxxxxxxx]
> Sent: Tuesday, December 4, 2018 3:32 AM
> To: Aisheng DONG <aisheng.dong@xxxxxxx>; linux-clk@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> mturquette@xxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Anson Huang
> <anson.huang@xxxxxxx>; Jacky Bai <ping.bai@xxxxxxx>; dl-linux-imx
> <linux-imx@xxxxxxx>; Aisheng DONG <aisheng.dong@xxxxxxx>
> Subject: Re: [PATCH V6 0/9] clk: add imx7ulp clk support
>
> Quoting A.s. Dong (2018-11-14 05:01:31)
> > This patch series intends to add imx7ulp clk support.
> >
> > i.MX7ULP Clock functions are under joint control of the System Clock
> > Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and
> > Core Mode Controller (CMC)1 blocks
> >
> > The clocking scheme provides clear separation between M4 domain and A7
> > domain. Except for a few clock sources shared between two domains,
> > such as the System Oscillator clock, the Slow IRC (SIRC), and and the
> > Fast IRC clock (FIRCLK), clock sources and clock management are
> > separated and contained within each domain.
> >
> > M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
> > A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
> >
> > Note: this series only adds A7 clock domain support as M4 clock domain
> > will be handled by M4 seperately.
> >
>
> I got:
>
> drivers/clk/imx/clk-pllv4.c:152:15: warning: symbol 'imx_clk_pllv4' was not
> declared. Should it be static?
> drivers/clk/imx/clk-pfdv2.c:166:15: warning: symbol 'imx_clk_pfdv2' was not
> declared. Should it be static?
> drivers/clk/imx/clk-divider-gate.c:174:15: warning: symbol
> 'imx_clk_divider_gate' was not declared. Should it be static?
> drivers/clk/imx/clk-composite-7ulp.c:22:15: warning: symbol
> 'imx7ulp_clk_composite' was not declared. Should it be static?
>
> which I can fix easily by throwing in clk.h into each file.

Thanks, I will double check it when I back to office.

Regards
Dong Aisheng