[PATCH v2 3/3] arm64: dts: qcom: sdm845: Add SD nodes for sdm845-mtp

[Evan Green]

Enable support for one of the micro SD slots on the MTP.

Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
---

Changes in v2:
 - Fixed alphabetization of node placement in sdm845-mtp.dtsi (Doug)
 - Fixed card detect name to match schematics (Doug).
 - Moved comment about drive strength next to the drive-strength entry
 (Doug)
 - Removed drive-strength from card detect input pin (Doug).
 - Consolidated tlmm nodes in MTP.

 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 58 ++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index b3def03581775..cde76da42cbb7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
 
@@ -358,8 +359,16 @@
 	status = "okay";
 };
 
-&tlmm {
-	gpio-reserved-ranges = <0 4>, <81 4>;
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
 &uart9 {
@@ -450,3 +459,48 @@
 		bias-pull-up;
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk {
+		pinconf {
+			pins = "sdc2_clk";
+			bias-disable;
+
+			/*
+			 * It seems that mmc_test reports errors if drive
+			 * strength is not 16 on clk, cmd, and data pins.
+			 */
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_cmd: sdc2-cmd {
+		pinconf {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_data: sdc2-data {
+		pinconf {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	sd_card_det_n: sd-card-det-n {
+		pinmux {
+			pins = "gpio126";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio126";
+			bias-pull-up;
+		};
+	};
+};
-- 
2.18.1