Re: [PATCH v2] mmc: mediatek: add MT8183 SDIO driver support

From: Nicolas Boichat
Date: Sun Dec 09 2018 - 01:01:39 EST


On Tue, Nov 27, 2018 at 5:27 PM Jjian Zhou <jjian.zhou@xxxxxxxxxxxx> wrote:
>
> On Mon, 2018-11-26 at 19:47 +0800, Nicolas Boichat wrote:
> > On Thu, Nov 22, 2018 at 4:03 PM Jjian Zhou <jjian.zhou@xxxxxxxxxxxx> wrote:
> > >
> > > MT8183 need SDIO driver. So it need add new code
> > > to support it.
> >
> > The description does not seem to match what is going on below: I don't
> > see anything that is obviously MT8183-specific. At first glance, this
> > seems like a patch that makes it possible to enable MMC_CAP_SDIO_IRQ
> > ("cap-sdio-irq" dt property).
> >
> > Can you describe in more detail what is going on here?
>
> Hi Nicolas,
> Thank you for your comments.
>
> Host wants to use the new method to signal/process SDIO IRQs, must
> enable MMC_CAPS_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq()
> callback. The current driver doesn't support it. This code makes it
> possible to enable SDIO IRQs by using the new method. It is described as
> "MT8183 need SDIO driver". Because it is tested based on MT8183.
> How about the below commit message:
>
> This code wants to support SDIO IRQs. It enables MMC_CAP_SDIO_IRQ &
> MMC_CAP2_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq() callback.

Sorry, I forgot to reply earlier.

"This patch enables support for SDIO IRQs" sounds better to me, but
that's for the commit message.

For the commit _title_, you should not need to mention MT8183 (we have
a similar out-of-tree patch on chromeos-3.18 for MT8173:
https://crrev.com/c/319366, so I assume it'd be useful on many MTK
SoCs). But you can mention that this is tested on MT8183 in the commit
message.

I'd use "mmc: mediatek: Add MMC_CAP_SDIO_IRQ support" as commit title.

Thanks,

> Thanks a lot.
>
> >
> > > Signed-off-by: Jjian Zhou <jjian.zhou@xxxxxxxxxxxx>
> > > Signed-off-by: Yong mao <yong.mao@xxxxxxxxxxxx>
> > > Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
> > > ---
> > > drivers/mmc/host/mtk-sd.c | 51 ++++++++++++++++++++++++++++++++++++++++++++---
> > > 1 file changed, 48 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > > index 6334cc7..da2a047 100644
> > > --- a/drivers/mmc/host/mtk-sd.c
> > > +++ b/drivers/mmc/host/mtk-sd.c
> > > @@ -1114,6 +1114,7 @@ static void msdc_start_command(struct msdc_host *host,
> > > struct mmc_request *mrq, struct mmc_command *cmd)
> > > {
> > > u32 rawcmd;
> > > + unsigned long flags;
> > >
> > > WARN_ON(host->cmd);
> > > host->cmd = cmd;
> > > @@ -1131,7 +1132,12 @@ static void msdc_start_command(struct msdc_host *host,
> > > cmd->error = 0;
> > > rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
> > >
> > > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > > + spin_lock_irqsave(&host->lock, flags);
> > > sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
> > > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > > + spin_unlock_irqrestore(&host->lock, flags);
> > > +
> > > writel(cmd->arg, host->base + SDC_ARG);
> > > writel(rawcmd, host->base + SDC_CMD);
> > > }
> > > @@ -1351,6 +1357,27 @@ static void msdc_request_timeout(struct work_struct *work)
> > > }
> > > }
> > >
> > > +static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> > > +{
> > > + unsigned long flags;
> > > + struct msdc_host *host = mmc_priv(mmc);
> > > +
> > > + if (enb)
> > > + pm_runtime_get_sync(host->dev);
> > > +
> > > + spin_lock_irqsave(&host->lock, flags);
> > > + if (enb)
> > > + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> > > + else
> > > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> > > + spin_unlock_irqrestore(&host->lock, flags);
> > > +
> > > + if (!enb) {
> > > + pm_runtime_mark_last_busy(host->dev);
> > > + pm_runtime_put_autosuspend(host->dev);
> > > + }
> > > +}
> > > +
> > > static irqreturn_t msdc_irq(int irq, void *dev_id)
> > > {
> > > struct msdc_host *host = (struct msdc_host *) dev_id;
> > > @@ -1373,7 +1400,12 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> > > data = host->data;
> > > spin_unlock_irqrestore(&host->lock, flags);
> > >
> > > - if (!(events & event_mask))
> > > + if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
> > > + msdc_enable_sdio_irq(host->mmc, 0);
> > > + sdio_signal_irq(host->mmc);
> > > + }
> > > +
> > > + if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> > > break;
> > >
> > > if (!mrq) {
> > > @@ -1493,8 +1525,11 @@ static void msdc_init_hw(struct msdc_host *host)
> > > */
> > > sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
> > >
> > > - /* disable detect SDIO device interrupt function */
> > > - sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > > + /* Config SDIO device detect interrupt function */
> > > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > > + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > > + else
> > > + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > >
> > > /* Configure to default data timeout */
> > > sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> > > @@ -2013,6 +2048,11 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> > > sdr_clr_bits(host->base + EMMC_IOCON, 1);
> > > }
> > >
> > > +static void msdc_ack_sdio_irq(struct mmc_host *mmc)
> > > +{
> > > + msdc_enable_sdio_irq(mmc, 1);
> > > +}
> > > +
> > > static const struct mmc_host_ops mt_msdc_ops = {
> > > .post_req = msdc_post_req,
> > > .pre_req = msdc_pre_req,
> > > @@ -2020,6 +2060,8 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> > > .set_ios = msdc_ops_set_ios,
> > > .get_ro = mmc_gpio_get_ro,
> > > .get_cd = mmc_gpio_get_cd,
> > > + .enable_sdio_irq = msdc_enable_sdio_irq,
> > > + .ack_sdio_irq = msdc_ack_sdio_irq,
> > > .start_signal_voltage_switch = msdc_ops_switch_volt,
> > > .card_busy = msdc_card_busy,
> > > .execute_tuning = msdc_execute_tuning,
> > > @@ -2147,6 +2189,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
> > > else
> > > mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
> > >
> > > + if (mmc->caps & MMC_CAP_SDIO_IRQ)
> > > + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
> > > +
> > > mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> > > /* MMC core transfer sizes tunable parameters */
> > > mmc->max_segs = MAX_BD_NUM;
> > > --
> > > 1.9.1
> > >
>
>