Re: [PATCH] ARM: dts: at91: sama5d2 Xplained: add QSPI0 + SPI NOR memory nodes

From: Tudor.Ambarus
Date: Tue Dec 11 2018 - 09:49:51 EST


Hi, Boris,

On 12/11/2018 04:40 PM, Boris Brezillon wrote:
> On Mon, 10 Dec 2018 17:15:29 +0000
> <Tudor.Ambarus@xxxxxxxxxxxxx> wrote:
>
>> From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxx>
>>
>> This patch configures the QSPI0 controller pin muxing and declares
>> a jedec,spi-nor memory.
>>
>> sama5d2 Xplained RevB and RevC use the Macronix MX25L25673G flash
>> memory which advertises a maximum frequency of 80MHz for Quad IO
>> Fast Read. Set the spi-max-frequency to 80MHz knowing that actually
>> the QSPI drver will set the SPI bus clock to 166MHz / 3 = 55.3MHz.

s/drver/driver

>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxxxxx>
>> [tudor.ambarus@xxxxxxxxxxxxx:
>> - drop partitions,
>> - add spi-rx/tx-bus-width
>> - change spi-max-frequency to match the 80MHz limit advertised by
>> MX25L25673G for Quad IO Fast Read,
>> - reword commit message and subject.]
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 31 +++++++++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> index 518e2b095ccf..171bc82cfbbf 100644
>> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> @@ -108,6 +108,21 @@
>> };
>>
>> apb {
>> + qspi0: spi@f0020000 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_qspi0_default>;
>> + /* status = "okay"; */ /* conflict with sdmmc1 */
>> +
>> + flash@0 {
>> + compatible = "jedec,spi-nor";
>> + reg = <0>;
>> + spi-max-frequency = <80000000>;
>> + spi-tx-bus-width = <4>;
>> + spi-rx-bus-width = <4>;
>> + m25p,fast-read;
>> + };
>
> I'm a bit lost. What's the point of defining this if the QSPI
> controller is not enabled?

You can enable qspi if you disable sdmmc1. I thought of having all described
together and choose one or another depending on needs.

ta