Re: [PATCH RESEND v7 4/4] clk: meson: add one based divider support for sclk divider

From: Jerome Brunet
Date: Tue Dec 11 2018 - 12:17:05 EST


On Tue, 2018-12-11 at 00:04 +0800, Jianxin Pan wrote:
> When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
> one based divider (div = val), and zero value gates the clock
>
> Signed-off-by: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
> ---
> drivers/clk/meson/clkc-audio.h | 1 +
> drivers/clk/meson/sclk-div.c | 28 ++++++++++++++++++----------
> 2 files changed, 19 insertions(+), 10 deletions(-)

Such a patch should be done earlier in the series, at least before using sclk
in your controller, otherwise thing will be broken in between

In general, I would prefer if you had added two helper function to deal with
the translation between register value and divider value.

Only these function should care about CLK_DIVIDER_ONE_BASED, the rest should
just call them.

This, we will be able to deal the with HI (duty cycle) part as well, which you
completly skiped.

I know your device does not have this, but still the code has to make sense.

>
> diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
> index 0a7c157..9bd6ced 100644
> --- a/drivers/clk/meson/clkc-audio.h
> +++ b/drivers/clk/meson/clkc-audio.h
> @@ -20,6 +20,7 @@ struct meson_sclk_div_data {
> struct parm hi;
> unsigned int cached_div;
> struct clk_duty cached_duty;
> + u8 flags;
> };
>
> extern const struct clk_ops meson_clk_triphase_ops;
> diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
> index bc64019..d98707b 100644
> --- a/drivers/clk/meson/sclk-div.c
> +++ b/drivers/clk/meson/sclk-div.c
> @@ -24,22 +24,23 @@
> return (struct meson_sclk_div_data *)clk->data;
> }
>
> -static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
> -{
> - return (1 << sclk->div.width) - 1;
> -}
> -
> static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
> {
> - return sclk_div_maxval(sclk) + 1;
> + if (sclk->flags & CLK_DIVIDER_ONE_BASED)
> + return clk_div_mask(sclk->div.width);
> + else
> + return clk_div_mask(sclk->div.width) + 1;

seems over complicated.
why no call clk_div_mask just once, and add 1 if necessary ?

> }
>
> static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
> unsigned long prate, int maxdiv)
> {
> int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
> + int mindiv = (sclk->flags & CLK_DIVIDER_ONE_BASED) ? 1 : 2;

This is why I want helpers, don't like this above

>
> - return clamp(div, 2, maxdiv);
> + return clamp(div, mindiv, maxdiv);
> }
>
> static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
> @@ -47,7 +48,7 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
> long rate,
> struct meson_sclk_div_data *sclk)
> {
> struct clk_hw *parent = clk_hw_get_parent(hw);
> - int bestdiv = 0, i;
> + int bestdiv = 0, i, mindiv;
> unsigned long maxdiv, now, parent_now;
> unsigned long best = 0, best_parent = 0;
>
> @@ -64,8 +65,9 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned
> long rate,
> * unsigned long in rate * i below
> */
> maxdiv = min(ULONG_MAX / rate, maxdiv);
> + mindiv = (sclk->flags & CLK_DIVIDER_ONE_BASED) ? 1 : 2;
>
> - for (i = 2; i <= maxdiv; i++) {
> + for (i = mindiv; i <= maxdiv; i++) {
> /*
> * It's the most ideal case if the requested rate can be
> * divided from parent clock without needing to change
> @@ -153,10 +155,14 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
> static void sclk_apply_divider(struct clk_regmap *clk,
> struct meson_sclk_div_data *sclk)
> {
> + unsigned int div;
> +
> if (MESON_PARM_APPLICABLE(&sclk->hi))
> sclk_apply_ratio(clk, sclk);
>
> - meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
> + div = (sclk->flags & CLK_DIVIDER_ONE_BASED) ?
> + sclk->cached_div : (sclk->cached_div - 1);

helpers again.

> + meson_parm_write(clk->map, &sclk->div, div);
> }
>
> static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> @@ -223,6 +229,8 @@ static void sclk_div_init(struct clk_hw *hw)
> /* if the divider is initially disabled, assume max */
> if (!val)
> sclk->cached_div = sclk_div_maxdiv(sclk);
> + else if (sclk->flags & CLK_DIVIDER_ONE_BASED)
> + sclk->cached_div = val;
> else
> sclk->cached_div = val + 1;

same ...

>