Re: [PATCH] ARM: dts: exynos: Specify I2S assigned clocks in proper node

[Sylwester Nawrocki]

On 12/14/18 07:59, Greg KH wrote:
> On Thu, Dec 13, 2018 at 09:56:56PM +0100, Krzysztof Kozlowski wrote:
>> On Wed, Dec 12, 2018 at 06:57:44PM +0100, Sylwester Nawrocki wrote:
>>> The assigned parent clocks should be normally specified in the consumer
>>> device's DT node, this ensures respective driver always sees correct clock
>>> settings when required.
>>>
>>> This patch fixes regression in audio subsystem on Odroid XU3/XU4 boards
>>> that appeared after commits:
>>>
>>> 'commit 647d04f8e07a ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined")'
>>> 'commit 995e73e55f46 ("ASoC: samsung: i2s: Fix rclk_srcrate handling")'
>>> 'commit 48279c53fd1d ("ASoC: samsung: i2s: Prevent external abort on exynos5433 I2S1 access")'
>>>
>>> Without this patch the driver gets wrong clock as the I2S function (op_clk)
>>> clock in probe() and effectively the clock which is finally assigned from DT
>>> is not being enabled/disabled in the runtime resume/suspend ops.
>>>
>>> Without the above listed commits the EXYNOS_I2S_BUS clock was always set
>>> as parent of CLK_I2S_RCLK_SRC regardless of DT settings so there was no issue
>>> with not enabled EXYNOS_SCLK_I2S.
>>>
>>> Cc: stable@xxxxxxxxxxxxxxx # v4.17+
>>
>> I gues your format would work (got recognized by stable scripts) but
>> strictly speaking format is different:
>>
>> 	Cc: <stable@xxxxxxxxxxxxxxx> # 4.17.x
>>
>> https://elixir.bootlin.com/linux/latest/source/Documentation/process/stable-kernel-rules.rst#L127
>>
>> Thanks, fixed and applied.

Thanks for correcting this, indeed I just looked at existing usage 
in git log rather than at the documentation.

> Either works just fine, my scripts have to be a bit flexible due to all
> of the odd ways people like to tag things here...

-- 
Regards,
Sylwester