[PATCH lora-next 4/4] dt-bindings: lora: sx130x: add clock bindings

From: Ben Whitten
Date: Tue Jan 08 2019 - 03:42:31 EST


The sx130x family consumes two clocks, a 32MHz clock provided by a
connected IQ transceiver, and a 133MHz high speed clock.

In the example we connect the concentrator to output 0 of a fixed clock
providing the 133MHz high speed clock, and we connect to output 0 of a
connected transceiver 32MHz clock.

The connected radios are both fed from output 0 of a fixed 32MHz clock,
with only one being the clock source back with one output to the
sx130x concentrator.

Signed-off-by: Ben Whitten <ben.whitten@xxxxxxxxx>
---
.../{ => net}/lora/semtech,sx130x.yaml | 39 ++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
rename Documentation/devicetree/bindings/{ => net}/lora/semtech,sx130x.yaml (62%)

diff --git a/Documentation/devicetree/bindings/lora/semtech,sx130x.yaml b/Documentation/devicetree/bindings/net/lora/semtech,sx130x.yaml
similarity index 62%
rename from Documentation/devicetree/bindings/lora/semtech,sx130x.yaml
rename to Documentation/devicetree/bindings/net/lora/semtech,sx130x.yaml
index ad263bc4e60d..23a096ca2912 100644
--- a/Documentation/devicetree/bindings/lora/semtech,sx130x.yaml
+++ b/Documentation/devicetree/bindings/net/lora/semtech,sx130x.yaml
@@ -15,7 +15,8 @@ description: |
demodulating LoRa signals on 8 channels simultaneously.

It is typically paired with two sx125x IQ radios controlled over an
- SPI directly from the concentrator.
+ SPI directly from the concentrator. One of the radios will provide
+ a 32MHz clock back into the concentrator.

The concentrator itself it controlled over SPI.

@@ -41,6 +42,20 @@ properties:
in Hz. Maximum SPI frequency is 10MHz although 8MHz is typically used
on a number of cards.

+ clocks:
+ maxItems: 2
+ items:
+ - description: 32MHz clock provider
+ - description: 133MHz high speed clock provider
+ description: The chip requires two clock inputs; A 32MHz clock at CMOS
+ level which is provided from a connected radio.
+ And a 133MHz high speed clock at CMOS level provided by an oscillator.
+
+ clock-names:
+ items:
+ - const: clk32m
+ - const: clkhs
+
radio-spi:
description: The concentrator has two radios connected which are contained
within the following node.
@@ -64,11 +79,27 @@ required:

examples:
- |
+ tcxo: dummy32m {
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ clock-output-names = "tcxo";
+ #clock-cells = <0>;
+ };
+
+ clkhs: dummy133m {
+ compatible = "fixed-clock";
+ clock-frequency = <133000000>;
+ clock-output-names = "clkhs";
+ #clock-cells = <0>;
+ };
+
concentrator0: lora@0 {
compatible = "semtech,sx1301";
reg = <0>;
reset-gpios = <&pioB 27 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <8000000>;
+ clocks = <&radio1 0>, <&clkhs 0>;
+ clock-names = "clk32m", "clkhs";

radio-spi {
#address-cells = <1>;
@@ -77,11 +108,17 @@ examples:
radio0: lora@0 {
compatible = "semtech,sx1257";
reg = <0>;
+ clocks = <&tcxo 0>;
+ clock-names = "tcxo";
};

radio1: lora@1 {
compatible = "semtech,sx1257";
reg = <1>;
+ clocks = <&tcxo 0>;
+ clock-names = "tcxo";
+ clock-output-names = "clk32m";
+ #clock-cells = <0>;
};
};
};
--
2.17.1