Re: tpm_tis TPM2.0 not detected on cold boot

[Jarkko Sakkinen]

On Thu, Jan 03, 2019 at 04:47:31PM +0100, Michael Niewöhner wrote:
> On Thu, 2019-01-03 at 17:04 +0200, Jarkko Sakkinen wrote:
> > On Thu, Jan 03, 2019 at 02:38:11PM +0100, Michael Niewöhner wrote:
> > > On Thu, 2019-01-03 at 15:27 +0200, Jarkko Sakkinen wrote:
> > > > On Sun, Dec 23, 2018 at 12:55:12PM +0100, Michael Niewöhner wrote:
> > > > > There is another issue but I don't know if both are related. Maybe
> > > > > that's
> > > > > just a
> > > > > timing issue...
> > > > > 
> > > > > root@debian:~# dd if=/dev/hwrng bs=1 count=1
> > > > > dd: error reading '/dev/hwrng': Operation not permitted
> > > > > 0+0 records in
> > > > > 0+0 records out
> > > > > 0 bytes copied, 0.755958 s, 0.0 kB/s
> > > > > root@debian:~# dd if=/dev/hwrng bs=1 count=1 | xxd; dd if=/dev/hwrng
> > > > > bs=1
> > > > > count=1 | xxd
> > > > > dd: error reading '/dev/hwrng': Operation not permitted
> > > > > 0+0 records in
> > > > > 0+0 records out
> > > > > 0 bytes copied, 0.755697 s, 0.0 kB/s
> > > > > 1+0 records in
> > > > > 1+0 records out
> > > > > 00000000: 52                                       R
> > > > > 1 byte copied, 0.0106268 s, 0.1 kB/s
> > > > > 
> > > > > 
> > > > > Michael
> > > > 
> > > > What does /sys/devices/virtual/misc/hw_random/rng_current show?
> > > > 
> > > > Did run commands as a sanity check on my laptop and seem to work.
> > > > 
> > > > /Jarkko
> > > 
> > > rng_current says "tpm-rng-0", which should be correct
> > 
> > Is /dev/tpm0 accessible and usable?
> > 
> > /Jarkko
> 
> No, it does not seem to work:
> 
> root@debian:~# tpm_version                                     
> Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17),
> Communication failure
> root@debian:~# tcsd -f
> TCSD TDDL ioctl: (25) Inappropriate ioctl for device
> TCSD TDDL Falling back to Read/Write device support.
> TCSD TDDL ERROR: write to device /dev/tpm0 failed: Operation not permitted
> TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
> root@debian:~# stat /dev/tpm0
>   File: /dev/tpm0
>   Size: 0         	Blocks: 0          IO Block: 4096   character special
> file
> Device: 6h/6d	Inode: 1114        Links: 1     Device type: a,e0
> Access: (0600/crw-------)  Uid: (  104/     tss)   Gid: (  112/     tss)
> Access: 2019-01-03 16:39:20.627635333 +0100
> Modify: 2019-01-03 16:39:20.627635333 +0100
> Change: 2019-01-03 16:39:20.627635333 +0100
>  Birth: -

But those tools should not work because TrouSerS is for TPM 1.2.

/Jarkko