Re: [PATCH v2 3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
From: Jeffrey Hugo
Date: Wed Jan 16 2019 - 10:28:32 EST
On 1/16/2019 1:58 AM, Kishon Vijay Abraham I wrote:
Hi,
On 16/01/19 2:20 PM, Kishon Vijay Abraham I wrote:
On 15/01/19 11:41 PM, Bjorn Andersson wrote:
On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
MSM8998 contains one QUSB2 PHY which is very similar to the existing
sdm845 support.
I don't seem to have the dt-binding patch in my inbox. Can you send them as well?
Ignore my request. I found the patch.
Sorry about that. I was made aware there is something glitched when
sending this out, and the series didn't get threaded properly. I'll be
investigating and correcting for the next time I need to send out a series.
Is this change acceptable? I saw you picked up patch 1 (phy bindings)
and patch 4 (QMP phy changes), but not this one. I do want to see as
much of this hit 5.1 as possible, so if there is anything I need to
correct, please let me know. I'd be happy to update.
Thanks
Kishon
Thanks
Kishon
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 41 +++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9177989f..e5e4f36 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -152,6 +152,32 @@ enum qusb2phy_reg_layout {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
};
+static const unsigned int msm8998_regs_layout[] = {
+ [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+ [QUSB2PHY_PLL_STATUS] = 0x1a0,
+ [QUSB2PHY_PORT_TUNE1] = 0x23c,
+ [QUSB2PHY_PORT_TUNE2] = 0x240,
+ [QUSB2PHY_PORT_TUNE3] = 0x244,
+ [QUSB2PHY_PORT_TUNE4] = 0x248,
+ [QUSB2PHY_PORT_TEST1] = 0x24c,
+ [QUSB2PHY_PORT_TEST2] = 0x250,
+ [QUSB2PHY_PORT_POWERDOWN] = 0x210,
+ [QUSB2PHY_INTR_CTRL] = 0x22c,
+};
+
+static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+};
+
+
static const unsigned int sdm845_regs_layout[] = {
[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
[QUSB2PHY_PLL_STATUS] = 0x1a0,
@@ -221,6 +247,18 @@ struct qusb2_phy_cfg {
.autoresume_en = BIT(3),
};
+static const struct qusb2_phy_cfg msm8998_phy_cfg = {
+ .tbl = msm8998_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
+ .regs = msm8998_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
+};
+
static const struct qusb2_phy_cfg sdm845_phy_cfg = {
.tbl = sdm845_init_tbl,
.tbl_num = ARRAY_SIZE(sdm845_init_tbl),
@@ -734,6 +772,9 @@ static int qusb2_phy_exit(struct phy *phy)
.compatible = "qcom,msm8996-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
+ .compatible = "qcom,msm8998-qusb2-phy",
+ .data = &msm8998_phy_cfg,
+ }, {
.compatible = "qcom,sdm845-qusb2-phy",
.data = &sdm845_phy_cfg,
},
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.