Re: [PATCH 09/11] dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks

[Simon Horman]

On Wed, Jan 16, 2019 at 06:37:52PM +0000, Fabrizio Castro wrote:
> According to the latest information, the clock options for CAN on RZ/G2
> are the same as the ones available on R-Car Gen3

I'm taking your word for the above.
As the patch matches the description:

Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>

> Fixes: 868b7c0f43e6 ("dt-bindings: can: rcar_can: Add r8a774a1 support")
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/can/rcar_can.txt | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> index 7fcf501..b463e12 100644
> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -28,13 +28,8 @@ Required properties:
>  
>  - reg: physical base address and size of the R-Car CAN register map.
>  - interrupts: interrupt specifier for the sole interrupt.
> -- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> -	  devices.
> -	  phandles and clock specifiers for 3 CAN clock inputs for every other
> -	  SoC.
> -- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> -	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> -	       "can_clk".
> +- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> +- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk".
>  - pinctrl-0: pin control group to be used for this controller.
>  - pinctrl-names: must be "default".
>  
> @@ -50,8 +45,7 @@ using the below properties:
>  Optional properties:
>  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
>  			    <0x0> (default) : Peripheral clock (clkp1)
> -			    <0x1> : Peripheral clock (clkp2) (not supported by
> -				    RZ/G2 devices)
> +			    <0x1> : Peripheral clock (clkp2)
>  			    <0x3> : External input clock
>  
>  Example
> -- 
> 2.7.4
>