[PATCH 6/8] mtd: rawnand: jz4780-bch: Don't set clock rate in driver

[Paul Cercueil]

This should be done in devicetree. Besides, it prevents us from
supporting other SoCs which don't use the same clock frequency for the
BCH hardware.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/jz4780_bch.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/jz4780_bch.c
index 7e4e5e627603..161d3821e1c4 100644
--- a/drivers/mtd/nand/raw/jz4780_bch.c
+++ b/drivers/mtd/nand/raw/jz4780_bch.c
@@ -57,8 +57,6 @@
 #define BCH_BHINT_UNCOR			BIT(1)
 #define BCH_BHINT_ERR			BIT(0)
 
-#define BCH_CLK_RATE			(200 * 1000 * 1000)
-
 /* Timeout for BCH calculation/correction. */
 #define BCH_TIMEOUT_US			100000
 
@@ -348,8 +346,6 @@ static int jz4780_bch_probe(struct platform_device *pdev)
 		return PTR_ERR(bch->clk);
 	}
 
-	clk_set_rate(bch->clk, BCH_CLK_RATE);
-
 	mutex_init(&bch->lock);
 
 	bch->dev = dev;
-- 
2.11.0