Re: [PATCH v1 1/5] pwm: mediatek: add a property "mediatek,num-pwms"

[Ryder Lee]

On Fri, 2019-01-18 at 09:05 +0100, Uwe Kleine-KÃnig wrote:
> Hello,
> 
> just realized another issue while looking up a driver detail ...
> 
> On Fri, Jan 18, 2019 at 11:24:41AM +0800, Ryder Lee wrote:
> > This adds a property "mediatek,num-pwms" to avoid having an endless
> > list of compatibles with no differences for the same driver.
> > 
> > Thus, the driver should have backwards compatibility to older DTs.
> > 
> > Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> > ---
> > Changes since v1: add some checks for backwards compatibility.
> > ---
> >  drivers/pwm/pwm-mediatek.c | 27 ++++++++++++++++++---------
> >  1 file changed, 18 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > index eb6674c..81b7e5e 100644
> > --- a/drivers/pwm/pwm-mediatek.c
> > +++ b/drivers/pwm/pwm-mediatek.c
> > @@ -55,7 +55,7 @@ enum {
> >  };
> >  
> >  struct mtk_pwm_platform_data {
> > -	unsigned int num_pwms;
> > +	unsigned int num_pwms;	/* it should not be used in the future SoCs */
> >  	bool pwm45_fixup;
> >  	bool has_clks;
> >  };
> > @@ -226,27 +226,36 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> >  
> >  static int mtk_pwm_probe(struct platform_device *pdev)
> >  {
> > -	const struct mtk_pwm_platform_data *data;
> > +	struct device_node *np = pdev->dev.of_node;
> >  	struct mtk_pwm_chip *pc;
> >  	struct resource *res;
> > -	unsigned int i;
> > +	unsigned int i, num_pwms;
> >  	int ret;
> >  
> >  	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
> >  	if (!pc)
> >  		return -ENOMEM;
> >  
> > -	data = of_device_get_match_data(&pdev->dev);
> > -	if (data == NULL)
> > -		return -EINVAL;
> > -	pc->soc = data;
> > +	pc->soc = of_device_get_match_data(&pdev->dev);
> >  
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	pc->regs = devm_ioremap_resource(&pdev->dev, res);
> >  	if (IS_ERR(pc->regs))
> >  		return PTR_ERR(pc->regs);
> >  
> > -	for (i = 0; i < data->num_pwms + 2 && pc->soc->has_clks; i++) {
> > +	/* Check if we have set 'num-pwms' in DTs. */
> > +	ret = of_property_read_u32(np, "mediatek,num-pwms", &num_pwms);
> > +	if (ret < 0) {
> > +		/* If no, fallback to use SoC data for backwards compatibility. */
> > +		if (pc->soc->num_pwms) {
> > +			num_pwms = pc->soc->num_pwms;
> > +		} else {
> > +			dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
> > +			return ret;
> > +		}
> > +	}
> > +
> > +	for (i = 0; i < num_pwms + 2 && pc->soc->has_clks; i++) {
> >  		pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
> 
> If a dt contains
> 
> 	mediatek,num-pwms = <17>;
> 
> you're accessing pc->clks[18] which is an out-of-bounds access, so
> better check the limit or allocate the clks array dynamically.
> 

Thanks for the reminder. I will fix it in v2.

Ryder