Re: [PATCH V9 1/3] dt-bindings: mmc: tegra: Add supports-cqe property

[Rob Herring]

On Mon, Jan 21, 2019 at 11:43:33AM +0100, Thierry Reding wrote:
> On Tue, Jan 15, 2019 at 11:03:50AM -0800, Sowjanya Komatineni wrote:
> > Add supports-cqe optional property for Tegra SDMMC.
> > 
> > Tegra186 and Tegra194 supports HW Command queue only
> > on SDMMC4 controller. This property is used to identify
> > command queue support controller in the tegra sdhci driver.
> > 
> > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> > index 32b4b4e41923..fb14c2c8d7ee 100644
> > --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> > +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
> > @@ -72,6 +72,10 @@ Optional properties for Tegra210 and Tegra186:
> >  - nvidia,default-trim : Specify the default outbound clock trimmer
> >    value.
> >  - nvidia,dqs-trim : Specify DQS trim value for HS400 timing
> > +- supports-cqe : The presence of this property indicates that the
> > +  corresponding controller supports HW command queue feature.
> > +  Tegra186 and Tegra194 has 4 SDMMC Controllers and only SDMMC4
> > +  controller supports HW Command Queue with eMMC device.
> 
> Hi Rob,
> 
> are you okay with the property name for this. I'm wondering if it should
> have a vendor prefix or not, but I suspect that something like this may
> be needed for other vendors as well, so not having a vendor prefix could
> be warranted in this case.

Seems likely. Please document with common MMC properties in that case.

Rob