Re: [PATCH V2 2/2] dt-bindings: interrupt-controller: Update csky mpintc

From: Guo Ren
Date: Mon Jan 21 2019 - 09:55:37 EST


On Mon, Jan 21, 2019 at 08:12:15AM -0600, Rob Herring wrote:
> On Fri, Jan 18, 2019 at 10:53 AM <guoren@xxxxxxxxxx> wrote:
> >
> > From: Guo Ren <ren_guo@xxxxxxxxx>
> >
> > Add trigger type and priority setting for csky,mpintc.
> >
> > Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx>
> > ---
> > .../bindings/interrupt-controller/csky,mpintc.txt | 33 +++++++++++++++++++---
> > 1 file changed, 29 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > index ab921f1..badbd38 100644
> > --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > @@ -6,11 +6,18 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
> > SMP soc, and it also could be used in non-SMP system.
> >
> > Interrupt number definition:
> > -
> > 0-15 : software irq, and we use 15 as our IPI_IRQ.
> > 16-31 : private irq, and we use 16 as the co-processor timer.
> > 31-1024: common irq for soc ip.
> >
> > +Interrupt triger mode:
> > + IRQ_TYPE_LEVEL_HIGH (default)
> > + IRQ_TYPE_LEVEL_LOW
> > + IRQ_TYPE_EDGE_RISING
> > + IRQ_TYPE_EDGE_FALLING
> > +
> > +Interrupt priority range: 0-255
> > +
> > =============================
> > intc node bindings definition
> > =============================
> > @@ -26,15 +33,33 @@ intc node bindings definition
> > - #interrupt-cells
> > Usage: required
> > Value type: <u32>
> > - Definition: must be <1>
> > + Definition: could be <1> or <2> or <3>
>
> For a given controller, '#interrupt-cells' shouldn't really be
> variable. If there are different capabilities, then you should have
> different compatible strings.
Ok, I'll Define it to <3>, see my next version of patch.

<irqnum trigger_type priority>

Best Regards
Guo Ren