Re: [PATCH] Input: synaptics - add PNP IDs for Dell XPS models to forcepad
From: Kim Phillips
Date: Mon Jan 21 2019 - 18:11:15 EST
On 1/17/19 2:13 AM, Benjamin Tissoires wrote:
On Wed, Jan 16, 2019 at 5:59 AM Kim Phillips <kim@xxxxxxxxxxxxxxx> wrote:
On 1/15/19 2:57 AM, Benjamin Tissoires wrote:
On Mon, Jan 14, 2019 at 7:40 PM Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
On Sat, Jan 12, 2019 at 04:04:36PM -0600, Kim Phillips wrote:
On 1/11/19 7:40 PM, Dmitry Torokhov wrote:
Hi Kim,
Hi Dmitry,
On Fri, Jan 11, 2019 at 02:54:30PM -0600, Kim Phillips wrote:
This patch is the result of seeing this message:
psmouse serio1: synaptics: Your touchpad (PNP: DLL087c PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@xxxxxxxxxxxxxxxx
If I set psmouse.synaptics_intertouch=1, or add the PNP ID to
smbus_pnp_ids, the touchpad continues to work, and the above message
goes away, but we now get:
psmouse serio1: synaptics: Trying to set up SMBus access
psmouse serio1: synaptics: SMbus companion is not ready yet
With this patch applied, i.e., the PNP IDs are added to the forcepad
array, the touchpad continues to work and all of the above messages
disappear.
Are you sure the touchpad in XPSes is a forcepad (i.e. it does not have
physical button underneath it)? As far as I know there were only couple
of HP laptops with forcepads and when switching to RMI mode forcepads
need F21 handler that we do not currently have in the kernel.
I see, no, I'm not sure, but assuming you're right, the IDs
should be added to the smbus array instead, after fixing
the SMbus "companion not ready" problem? Pointers for that and
the below interrupts when touchpad idle after resume, welcome.
Also, the link to get the RMI4 spec in
Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
is broken. Any pointers for that also appreciated.
OK, sorting it all out some more:
- because we do not have support for F21 necessary for forcepads adding
APIC ID to forcepad list actuallty disables SMbus companion mode, that
is why you no longer see "companion not ready" messages vs. setting
psmouse.synaptics_intertouch=1 module parameter.
Yep
- this does not really matter as your touchpad ends up being driven by
i2c-hid and hid-multitouch drivers, and that is how we wait it to
work, as we do not want to deviate from behavior on Windows since OEM
tested it (the device and firmware) in tha configuration.
Yep too. The I2C-hid touchpads from Synaptics do not have the SMBus
wired at all, so we can't enable SMBus for them. Also, the fact that
the device gets loaded over i2c-hid means that we can't know that it
is the case from the psmouse/synaptics point of view.
Sigh, OK, I wasn't registering the word "not" when reading
"If i2c-hid and hid-rmi are not used" too quickly.
- we need to figure out issue with interrupts on resume, maybe Benjamin
have seen it?
First time I see it.
I just tried on a XPS 9360 and kernel v4.18 (fedora) and nothing was a problem.
I then tried on a XPS 9575 with v4.19, and here, the wacom I2C node is
also keeping firing the interrupts, but not the touchpad. However,
here, the interrupts are not stopping when I touch the touchscreen or
if I approach a pen.
Kim, rmmod-ing i2c-hid and modprobing back it with the parameter
debug=1 doesn't show any events processed when the interrupts are
firing. Do you see the same?
After rmmodding i2c_hid, the WCOM488F and SYNA2393 entries in /proc/interrupts
somewhat expectedly disappear, however, the modprobe (with or without debug=1)
fails to bring them back, with these messages left in dmesg:
[ 3882.073222] calling i2c_hid_driver_init+0x0/0x1000 [i2c_hid] @ 3082
[ 3882.180938] i2c_hid i2c-WCOM488F:00: HID over i2c has not been provided an Int IRQ
[ 3882.181060] i2c_hid: probe of i2c-WCOM488F:00 failed with error -22
[ 3882.181065] probe of i2c-WCOM488F:00 returned 0 after 496 usecs
[ 3882.289196] i2c_hid i2c-SYNA2393:00: HID over i2c has not been provided an Int IRQ
[ 3882.289318] i2c_hid: probe of i2c-SYNA2393:00 failed with error -22
[ 3882.289321] probe of i2c-SYNA2393:00 returned 0 after 508 usecs
[ 3882.289418] initcall i2c_hid_driver_init+0x0/0x1000 [i2c_hid] returned 0 after 211119 usecs
Yes, that is a weird behavior I experience the other day also. It
looks like rmmod-ing the driver simply kills the irq description
attached to the i2c node. This waasn't the case previously, and I
wonder if the issue is in i2c-hid (unlikely) or in i2c-core.
In order to work around that problem, I set h2c_hid.debug=1 in the
boot command line, and after a resume, dmesg contains these messages,
relevant to i2c_hid:
[ 267.235673] i2c_hid i2c-WCOM488F:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 3078, parent: i2c-9
[ 267.235676] input input16: calling input_dev_resume+0x0/0x50 @ 3060, parent: card0
[ 267.235681] input input16: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 267.235682] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power
[ 267.235687] input input17: calling input_dev_resume+0x0/0x50 @ 3060, parent: card0
[ 267.235689] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 00 08
[ 267.235693] input input17: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 267.235698] idma64 idma64.1: calling platform_pm_resume+0x0/0x50 @ 3060, parent: 0000:00:15.1
[ 267.235701] idma64 idma64.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
[ 267.235706] i2c_designware i2c_designware.1: calling platform_pm_resume+0x0/0x50 @ 3060, parent: 0000:00:15.1
[ 267.235709] i2c_designware i2c_designware.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
[ 267.235718] rfkill rfkill0: calling rfkill_resume+0x0/0x60 @ 3060, parent: phy0
[ 267.235724] rfkill rfkill0: rfkill_resume+0x0/0x60 returned 0 after 3 usecs
[ 267.235768] i2c_hid i2c-SYNA2393:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 3108, parent: i2c-10
[ 267.235774] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power
[ 267.235776] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 00 08
[ 267.236051] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 267.236053] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 3d 03 23 00 04 00 0d 00
[ 267.236076] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.236080] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 fd 89 a3 07 f3 02 20 8d 49 06 d7 9c ff ff 80 59 5c 13 d7 9c ff ff 08 00 00 08 d7 9c ff ff 01 00 00 00 00 00 00 00 16 00 00 00 66 69 6c 65 75 74 6c 2e 6d 65 73 73
[ 267.237691] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.238137] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 267.238140] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 34 03 23 00 04 00 04 03
[ 267.238670] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.238673] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.239708] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.240084] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 267.240087] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 36 03 23 00 04 00 06 03
[ 267.241377] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.241380] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 267.241711] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.243279] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.243981] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.243984] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.244847] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.245360] i2c_hid i2c-SYNA2393:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 9360 usecs
[ 267.245455] input input27: calling input_dev_resume+0x0/0x50 @ 3060, parent: 0018:06CB:7A13.0002
[ 267.245460] input input27: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 267.246773] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.246777] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 267.246919] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.248517] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.249383] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.249386] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.250116] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.251767] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.252137] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.252140] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 267.253440] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.254734] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.254737] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.255015] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.256612] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.257475] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.257478] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 267.258275] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.259852] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.260046] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.260049] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.261441] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.262789] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.262792] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 267.263129] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.264718] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.265410] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 267.265413] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 267.266318] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.267971] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.268169] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 267.268172] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3e 03 05 00 05 00 0e 02 00
[ 267.268728] i2c_hid i2c-WCOM488F:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 32273 usecs
[ 267.269575] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.271144] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.272719] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
[ 267.274298] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 3c 03 a8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 60 01 00
...and it goes on and on, where that same last line gets
repeated as the interrupts fire, until I start using the touchpad,
thereby stopping the interrupts.
It looks like valid inputs. So I would expect the firmware to unset
the IRQ line, but it doesn't do it.
On an other thread, it has been brought to my attention that maybe we
are not 100% compatible with the Windows driver regarding
sleep/power_on commands. We expect the device to be ready while the
Windows driver waits a little before sending a command. Maybe we can
try to see if adding I2C_HID_QUIRK_DELAY_AFTER_SLEEP to this device
changes something.
Thought I'd try DELAY_AFTER_SLEEP. Please double check whether
I did that correctly given these diagnostics:
[ 5.720289] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-SYNA2393:00/0018:06CB:7A13.0006/input/input20
[ 5.720362] hid-multitouch 0018:06CB:7A13.0006: input,hidraw5: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00
I added both 2393 and 7A13 as model numbers just
because I wasn't sure which one was which:
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 27519eb8ee63..d297ad6744e2 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1072,6 +1072,9 @@
#define USB_DEVICE_ID_SYNAPTICS_HD 0x0ac3
#define USB_DEVICE_ID_SYNAPTICS_QUAD_HD 0x1ac3
#define USB_DEVICE_ID_SYNAPTICS_TP_V103 0x5710
+#define I2C_VENDOR_ID_SYNAPTICS 0x06cb
+#define I2C_PRODUCT_ID_SYNAPTICS_2393 0x2393
+#define I2C_PRODUCT_ID_SYNAPTICS_7A13 0x7a13
#define USB_VENDOR_ID_TEXAS_INSTRUMENTS 0x2047
#define USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA 0x0855
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 8555ce7e737b..cfdd5f2e4781 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -179,6 +179,10 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
I2C_HID_QUIRK_NO_RUNTIME_PM },
+ { I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_2393,
+ I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
+ { I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_7A13,
+ I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ 0, 0 }
};
@@ -419,14 +423,19 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
delay = jiffies_to_usecs(ihid->sleep_delay - now);
usleep_range(delay, delay + 1);
}
- }
+ dev_err(&client->dev, "%s %d: delayed after sleep with power on\n", __func__, __LINE__);
+ } else
+ dev_err(&client->dev, "%s %d: did NOT delay after sleep whilst powered on. No quirk?\n", __func__, __LINE__);
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
- power_state == I2C_HID_PWR_SLEEP)
+ power_state == I2C_HID_PWR_SLEEP) {
ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
+ dev_err(&client->dev, "%s %d: delayed after sleep with power set to sleep\n", __func__, __LINE__);
+ } else
+ dev_err(&client->dev, "%s %d: did NOT delay after sleep at sleep. No quirk?\n", __func__, __LINE__);
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
This is as I give the suspend command, using the touchpad to
click on the pause button in Gnome (whilst holding down ALT):
[ 319.326944] i2c_hid i2c-SYNA2393:00: input: 20 00 03 03 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e2 c4 01 00
[ 319.334357] i2c_hid i2c-SYNA2393:00: input: 20 00 03 03 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b c5 01 00
[ 319.341692] i2c_hid i2c-SYNA2393:00: input: 20 00 03 03 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 74 c5 01 00
[ 319.348994] i2c_hid i2c-SYNA2393:00: input: 20 00 03 03 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bd c5 01 00
[ 319.355556] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
...
[ 349.858808] PM: suspend entry (deep)
[ 349.858810] PM: Syncing filesystems ... done.
...
[ 349.985145] i2c_hid i2c-SYNA2393:00: calling acpi_subsys_suspend+0x0/0x60 @ 7, parent: i2c-10
[ 349.985147] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power
[ 349.985149] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power 428: did NOT delay after sleep whilst powered on. No quirk?
[ 349.985187] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 01 08
[ 349.985555] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power 436: delayed after sleep with power set to sleep
[ 349.985591] i2c_hid i2c-SYNA2393:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 431 usecs
[ 349.985636] input input17: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985639] input input17: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985642] input input16: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985645] input input16: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985648] input input15: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985650] input input15: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985653] input input14: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985656] input input14: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985659] input input13: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985661] input input13: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985664] input input12: calling input_dev_suspend+0x0/0x60 @ 12762, parent: card0
[ 349.985667] input input12: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.985678] i2c_designware i2c_designware.1: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: 0000:00:15.1
[ 349.985680] i2c_designware i2c_designware.1: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.985684] idma64 idma64.1: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: 0000:00:15.1
[ 349.985695] idma64 idma64.1: platform_pm_suspend+0x0/0x50 returned 0 after 9 usecs
[ 349.985698] leds dell::kbd_backlight: calling led_suspend+0x0/0x30 @ 12762, parent: dell-laptop
[ 349.985700] leds dell::kbd_backlight: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 349.985711] coretemp coretemp.0: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.985713] coretemp coretemp.0: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.985717] snd_hda_codec_hdmi hdaudioC0D2: calling pm_runtime_force_suspend+0x0/0xe0 @ 7, parent: 0000:00:1f.3
[ 349.985720] snd_hda_codec_hdmi hdaudioC0D2: pm_runtime_force_suspend+0x0/0xe0 returned 0 after 0 usecs
[ 349.985727] i2c_hid i2c-WCOM488F:00: calling acpi_subsys_suspend+0x0/0x60 @ 7, parent: i2c-9
[ 349.985729] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power
[ 349.985730] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power 428: did NOT delay after sleep whilst powered on. No quirk?
[ 349.985751] snd_hda_codec_realtek hdaudioC0D0: calling pm_runtime_force_suspend+0x0/0xe0 @ 311, parent: 0000:00:1f.3
[ 349.985765] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 01 08
[ 349.986162] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power 438: did NOT delay after sleep at sleep. No quirk?
[ 349.986199] i2c_hid i2c-WCOM488F:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 457 usecs
[ 349.986250] input input11: calling input_dev_suspend+0x0/0x60 @ 12762, parent: 9DBB5994-A997-11DA-B012-B622A1EF5492
[ 349.986253] input input11: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.986257] platform regulatory.0: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.986259] platform regulatory.0: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986262] dell-laptop dell-laptop: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.986264] dell-laptop dell-laptop: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986267] dell-smbios dell-smbios.1: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.986269] dell-smbios dell-smbios.1: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986272] dell-smbios dell-smbios.0: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.986274] dell-smbios dell-smbios.0: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986280] dcdbas dcdbas: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: platform
[ 349.986282] dcdbas dcdbas: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986293] leds input4::scrolllock: calling led_suspend+0x0/0x30 @ 12762, parent: input4
[ 349.986295] leds input4::scrolllock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 349.986297] leds input4::capslock: calling led_suspend+0x0/0x30 @ 12762, parent: input4
[ 349.986299] leds input4::capslock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 349.986301] leds input4::numlock: calling led_suspend+0x0/0x30 @ 12762, parent: input4
[ 349.986303] leds input4::numlock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 349.986306] i2c_designware i2c_designware.0: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: 0000:00:15.0
[ 349.986308] i2c_designware i2c_designware.0: platform_pm_suspend+0x0/0x50 returned 0 after 0 usecs
[ 349.986312] idma64 idma64.0: calling platform_pm_suspend+0x0/0x50 @ 12762, parent: 0000:00:15.0
[ 349.986322] idma64 idma64.0: platform_pm_suspend+0x0/0x50 returned 0 after 8 usecs
[ 349.986329] input input10: calling input_dev_suspend+0x0/0x60 @ 12762, parent: INT33D5:00
[ 349.986332] input input10: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.986335] input input9: calling input_dev_suspend+0x0/0x60 @ 12762, parent: INT33D5:00
[ 349.986337] input input9: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.986347] input input6: calling input_dev_suspend+0x0/0x60 @ 12762, parent: serio1
[ 349.986349] input input6: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.986357] input input8: calling input_dev_suspend+0x0/0x60 @ 12762, parent: LNXVIDEO:01
[ 349.986360] input input8: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 349.986363] input input7: calling input_dev_suspend+0x0/0x60 @ 12762, parent: LNXVIDEO:00
[ 349.986365] input input7: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
...
[ 349.987136] psmouse serio1: calling serio_suspend+0x0/0x20 @ 12762, parent: i8042
...
[ 351.598355] i2c_hid i2c-SYNA2393:00: calling acpi_subsys_suspend_late+0x0/0x60 @ 12784, parent: i2c-10
[ 351.598366] i2c_hid i2c-SYNA2393:00: acpi_subsys_suspend_late+0x0/0x60 returned 0 after 1 usecs
[ 351.598465] i2c_designware i2c_designware.1: calling dw_i2c_plat_suspend+0x0/0x40 @ 12762, parent: 0000:00:15.1
[ 351.598487] i2c_designware i2c_designware.1: dw_i2c_plat_suspend+0x0/0x40 returned 0 after 13 usecs
[ 351.598529] i2c_hid i2c-WCOM488F:00: calling acpi_subsys_suspend_late+0x0/0x60 @ 87, parent: i2c-9
[ 351.598540] i2c_hid i2c-WCOM488F:00: acpi_subsys_suspend_late+0x0/0x60 returned 0 after 1 usecs
[ 351.598609] i2c_designware i2c_designware.0: calling dw_i2c_plat_suspend+0x0/0x40 @ 12762, parent: 0000:00:15.0
[ 351.598628] i2c_designware i2c_designware.0: dw_i2c_plat_suspend+0x0/0x40 returned 0 after 12 usecs
...
[ 351.633232] i2c_hid i2c-SYNA2393:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 12784, parent: i2c-10
[ 351.633235] i2c_hid i2c-SYNA2393:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 351.633258] i2c_hid i2c-WCOM488F:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 12783, parent: i2c-9
[ 351.633261] i2c_hid i2c-WCOM488F:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
Here is the relevant portion of the resume cycle,
which is similar to the one I posted earlier:
[ 353.256580] leds dell::kbd_backlight: led_resume+0x0/0x30 returned 0 after 0 usecs
[ 353.256585] idma64 idma64.1: calling platform_pm_resume+0x0/0x50 @ 12762, parent: 0000:00:15.1
[ 353.256589] idma64 idma64.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256594] i2c_designware i2c_designware.1: calling platform_pm_resume+0x0/0x50 @ 12762, parent: 0000:00:15.1
[ 353.256597] i2c_designware i2c_designware.1: platform_pm_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256606] input input12: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256611] input input12: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256616] input input13: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256625] i2c_hid i2c-WCOM488F:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 12809, parent: i2c-9
[ 353.256630] input input13: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256632] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power
[ 353.256635] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power 428: did NOT delay after sleep whilst powered on. No quirk?
[ 353.256639] input input14: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256645] input input14: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256708] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 00 08
[ 353.256712] input input15: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256717] input input15: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256722] input input16: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256727] input input16: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256732] input input17: calling input_dev_resume+0x0/0x50 @ 12762, parent: card0
[ 353.256736] input input17: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.256759] i2c_hid i2c-SYNA2393:00: calling i2c_hid_resume+0x0/0x140 [i2c_hid] @ 12791, parent: i2c-10
[ 353.256767] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power
[ 353.256771] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power 426: delayed after sleep with power on
[ 353.256833] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 00 08
[ 353.257109] i2c_hid i2c-WCOM488F:00: i2c_hid_set_power 438: did NOT delay after sleep at sleep. No quirk?
[ 353.257135] i2c_hid i2c-SYNA2393:00: i2c_hid_set_power 438: did NOT delay after sleep at sleep. No quirk?
[ 353.257176] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.257233] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 1c 1c 15 40 25 ac 00 10 ba 13 17 be ff ff 02 00 00 00 00 00 00 00 38 07 00 7e a3 94 ff ff 18 0f 00 7e a3 94 ff ff d8 29 ca 75 a3 94 ff ff b0 07 00 7e a3 94 ff ff
[ 353.257240] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 353.257244] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 3d 03 23 00 04 00 0d 00
[ 353.258737] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.259889] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.259892] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.260345] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.261936] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.262416] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 353.262420] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 34 03 23 00 04 00 04 03
[ 353.262646] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.262650] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 353.264051] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.265306] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.265309] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.265631] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.267232] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.267705] i2c_hid i2c-SYNA2393:00: i2c_hid_set_or_send_report
[ 353.267708] i2c_hid i2c-SYNA2393:00: __i2c_hid_command: cmd=22 00 36 03 23 00 04 00 06 03
[ 353.268076] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.268080] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 353.269304] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.270683] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.270687] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.270877] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.272471] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.272983] i2c_hid i2c-SYNA2393:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 15834 usecs
[ 353.273091] input input27: calling input_dev_resume+0x0/0x50 @ 12762, parent: 0018:06CB:7A13.0002
[ 353.273096] input input27: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.273104] rfkill rfkill0: calling rfkill_resume+0x0/0x60 @ 12762, parent: phy0
[ 353.273112] rfkill rfkill0: rfkill_resume+0x0/0x60 returned 0 after 4 usecs
[ 353.273121] input input29: calling input_dev_resume+0x0/0x50 @ 12762, parent: 1-12:1.0
[ 353.273125] input input29: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.273130] rfkill rfkill1: calling rfkill_resume+0x0/0x60 @ 12762, parent: hci0
[ 353.273134] rfkill rfkill1: rfkill_resume+0x0/0x60 returned 0 after 0 usecs
[ 353.273436] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.273439] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 353.274593] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.276065] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.276069] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.276212] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.277809] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.278839] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.278843] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.281024] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.281449] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.281453] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.282614] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.284248] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.284251] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 03 05 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 353.284326] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.285890] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.286847] i2c_hid i2c-WCOM488F:00: i2c_hid_get_report
[ 353.286850] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3b 02 05 00
[ 353.287489] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.289099] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.289595] i2c_hid i2c-WCOM488F:00: i2c_hid_set_or_send_report
[ 353.289598] i2c_hid i2c-WCOM488F:00: __i2c_hid_command: cmd=04 00 3e 03 05 00 05 00 0e 02 00
[ 353.290178] i2c_hid i2c-WCOM488F:00: i2c_hid_resume+0x0/0x140 [i2c_hid] returned 0 after 32758 usecs
[ 353.290275] input input30: calling input_dev_resume+0x0/0x50 @ 12762, parent: 0018:056A:488F.0001
[ 353.290281] input input30: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.290287] input input31: calling input_dev_resume+0x0/0x50 @ 12762, parent: 0018:056A:488F.0001
[ 353.290292] input input31: input_dev_resume+0x0/0x50 returned 0 after 0 usecs
[ 353.290804] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.291066] acpi LNXPOWER:07: Turning OFF
[ 353.292115] acpi LNXPOWER:02: Turning OFF
[ 353.292403] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.293924] acpi LNXPOWER:01: Turning OFF
[ 353.294004] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.295015] OOM killer enabled.
[ 353.295017] Restarting tasks ...
[ 353.295617] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.297197] done.
[ 353.297238] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.298871] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.300494] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.302107] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.303732] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.305342] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.306955] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
[ 353.308955] i2c_hid i2c-SYNA2393:00: input: 20 00 03 01 38 02 a5 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 c6 01 00
...and so on until I touch the touchpad...
Note that, as without DELAY_AFTER_SLEEP, the last repeated
input values above after resume equal those in the last input
prior to suspend, so it's as if the touchpad's last interrupt
didn't get handled/acknowledged, and the contents of buffer
survived the suspend-resume cycle? I can't really tell what
those values mean - asked Dell for the manual for the touchpad
and got told they don't support Linux :(
Kim