Re: [PATCH v3 3/9] platform/chrome: Add support for raw commands in debugfs

From: Enric Balletbo Serra
Date: Tue Jan 22 2019 - 06:48:28 EST

Next message: Marc Zyngier: "Re: [PATCH 1/4] dt-binding: irq: imx-irqsteer: use irq number per channel instead of group number"
Previous message: Christian Brauner: "Re: linux-next: manual merge of the pidfd tree with the y2038 tree"
In reply to: Nick Crews: "[PATCH v3 3/9] platform/chrome: Add support for raw commands in debugfs"
Next in thread: Nick Crews: "[PATCH v3 5/9] platform/chrome: rtc: Add RTC driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Nick,

Why not create a module_platform_driver for this? So you have a kernel
module that you can load and unload for debug purposes instead of
add/remove the functionality at build time.

Missatge de Nick Crews <ncrews@xxxxxxxxxxxx> del dia ds., 19 de gen.
2019 a les 1:18:
>
> From: Duncan Laurie <dlaurie@xxxxxxxxxx>
>
> Add a debugfs attribute that allows sending raw commands to the EC.
> This is useful for development and debug but should not be enabled
> in a production environment.
>
> Turn the keyboard global mic mute led on
> > echo 00 f2 01 76 06 00 00 01 01 > /sys/kernel/debug/wilco_ec/raw
> Turn the keyboard global mic mute led off
> > echo 00 f2 01 76 06 00 00 01 00 > /sys/kernel/debug/wilco_ec/raw
> Get the EC firmware build date
> First send the request command
> > echo 00 f0 38 00 03 00 > raw
> Then read the result. "12/21/18" is in the middle of the response
> > cat raw
> 00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18.......
>
> Signed-off-by: Duncan Laurie <dlaurie@xxxxxxxxxx>
> Signed-off-by: Nick Crews <ncrews@xxxxxxxxxxxx>
> ---
>
> Changes in v3:
> - Move the attribute to the debugfs system
> - Move the implementation to debugfs.c
> - Improve the raw hex parsing
> - Encapsulate global variables in one object
> - Add safety check when passing less than 3 bytes
> - Move documentation to debugfs-wilco-ec
>
> Changes in v2:
> - Add sysfs documentation
> - rm duplicate EC_MAILBOX_DATA_SIZE defs
> - Make docstrings follow kernel style
> - Fix tags in commit msg
> - Move Kconfig to subdirectory
> - Reading raw now includes ASCII translation
>
> Documentation/ABI/testing/debugfs-wilco-ec | 23 +++
> drivers/platform/chrome/wilco_ec/Kconfig | 9 +
> drivers/platform/chrome/wilco_ec/Makefile | 2 +-
> drivers/platform/chrome/wilco_ec/core.c | 17 ++
> drivers/platform/chrome/wilco_ec/debugfs.c | 218 +++++++++++++++++++++
> include/linux/platform_data/wilco-ec.h | 3 +
> 6 files changed, 271 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/ABI/testing/debugfs-wilco-ec
> create mode 100644 drivers/platform/chrome/wilco_ec/debugfs.c
>
> diff --git a/Documentation/ABI/testing/debugfs-wilco-ec b/Documentation/ABI/testing/debugfs-wilco-ec
> new file mode 100644
> index 000000000000..90bc3fe08dff
> --- /dev/null
> +++ b/Documentation/ABI/testing/debugfs-wilco-ec
> @@ -0,0 +1,23 @@
> +What: /sys/kernel/debug/wilco_ec/raw
> +Date: January 2019
> +KernelVersion: 4.19
> +Description:
> + Write and read raw mailbox commands to the EC.
> +
> + For writing:
> + Bytes 0-1 indicate the message type:
> + 00 F0 = Execute Legacy Command
> + 00 F2 = Read/Write NVRAM Property
> + Byte 2 provides the command code
> + Bytes 3+ consist of the data passed in the request
> +
> + Example:
> + // Request EC info type 3 (EC firmware build date)
> + $ echo 00 f0 38 00 03 00 > raw
> + // View the result. The decoded ASCII result "12/21/18" is
> + // included after the raw hex.
> + $ cat raw
> + 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 .12/21/18.8...
> +
> + At least three bytes are required, for the msg type and command,
> + with additional bytes optional for additional data.
> diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
> index f8e6c9e8c5cd..0bd84c98b79b 100644
> --- a/drivers/platform/chrome/wilco_ec/Kconfig
> +++ b/drivers/platform/chrome/wilco_ec/Kconfig
> @@ -21,4 +21,13 @@ config WILCO_EC
> To compile this driver as a module, choose M here: the
> module will be called wilco_ec.
>
> +config WILCO_EC_SYSFS_RAW

s/SYSFS/DEBUGFS/

> + bool "Enable raw access to EC via sysfs"

s/sysfs/debugfs/

> + depends on WILCO_EC
> + help
> + If you say Y here, you get support for sending raw commands to
> + the Wilco EC via sysfs. These commands do not do any byte

s/sysfs/debugfs/

> + manipulation and allow for testing arbitrary commands. This
> + interface is intended for debug only and is disabled by default.
> +
> endif # WILCO_EC_PLATFORM
> diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
> index 03b32301dc61..86d0457d85ea 100644
> --- a/drivers/platform/chrome/wilco_ec/Makefile
> +++ b/drivers/platform/chrome/wilco_ec/Makefile
> @@ -1,4 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
>
> -wilco_ec-objs := core.o mailbox.o
> +wilco_ec-objs := core.o mailbox.o debugfs.o
> obj-$(CONFIG_WILCO_EC) += wilco_ec.o
> diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
> index 13fe21dd235a..749fd6a36057 100644
> --- a/drivers/platform/chrome/wilco_ec/core.c
> +++ b/drivers/platform/chrome/wilco_ec/core.c
> @@ -34,6 +34,7 @@ static int wilco_ec_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct wilco_ec_device *ec;
> + int ret;
>
> ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
> if (!ec)
> @@ -61,11 +62,27 @@ static int wilco_ec_probe(struct platform_device *pdev)
> cros_ec_lpc_mec_init(ec->io_packet->start,
> ec->io_packet->start + EC_MAILBOX_DATA_SIZE);
>
> + /* add debugfs attributes */
> + ret = wilco_ec_debugfs_init(ec);
> + if (ret) {
> + dev_err(dev, "Failed to create debugfs attributes\n");
> + goto destroy_mec;
> + }
> +
> return 0;
> +
> +destroy_mec:
> + cros_ec_lpc_mec_destroy();
> + return ret;
> }
>
> static int wilco_ec_remove(struct platform_device *pdev)
> {
> + struct wilco_ec_device *ec = platform_get_drvdata(pdev);
> +
> + /* remove debugfs attributes */
> + wilco_ec_debugfs_remove(ec);
> +
> /* Teardown cros_ec interface */
> cros_ec_lpc_mec_destroy();
>
> diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c
> new file mode 100644
> index 000000000000..46b0bf3fdf39
> --- /dev/null
> +++ b/drivers/platform/chrome/wilco_ec/debugfs.c
> @@ -0,0 +1,218 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * debugfs attributes for Wilco EC
> + *
> + * Copyright 2019 Google LLC
> + *
> + * There is only one attribute used for debugging, called raw.
> + * You can write a hexadecimal sentence to raw, and that series of bytes
> + * will be sent to the EC. Then, you can read the bytes of response
> + * by reading from raw.
> + */
> +
> +#include <linux/ctype.h>
> +#include <linux/debugfs.h>
> +#include <linux/fs.h>
> +#include <linux/platform_data/wilco-ec.h>
> +
> +#ifdef CONFIG_WILCO_EC_SYSFS_RAW
> +
> +#define FORMATTED_BUFFER_SIZE (EC_MAILBOX_DATA_SIZE_EXTENDED * 4)
> +
> +struct wilco_ec_debugfs {
> + struct wilco_ec_device *ec;
> + struct dentry *dir;
> + size_t response_size;
> + u8 raw_data[EC_MAILBOX_DATA_SIZE_EXTENDED];
> + u8 formatted_data[FORMATTED_BUFFER_SIZE];
> +};
> +
> +static struct wilco_ec_debugfs *debug_info;
> +
> +/**
> + * parse_hex_sentence() - Convert a ascii hex representation into byte array
> + * @in: Input buffer of ascii
> + * @isize: Length of input buffer
> + * @out: Output buffer
> + * @osize: Length of output buffer, e.g. max number of bytes to parse
> + *
> + * If an individual "word" within the hex sentence is longer than MAX_WORD_SIZE,
> + * then the sentence is illegal.
> + *
> + * Return: Number of bytes parsed, or negative error code on failure
> + */
> +static int parse_hex_sentence(const char *in, int isize, u8 *out, int osize)
> +{
> + int n_parsed = 0;
> + int word_start = 0;
> + int word_end;
> + int word_len;
> + /* Temp buffer for holding a "word" of chars that represents one byte */
> + const static int MAX_WORD_SIZE = 16;
> + char tmp[MAX_WORD_SIZE+1];
> + u8 byte;
> +
> + while (word_start < isize && n_parsed < osize) {
> + /* Find the start of the next word */
> + while (word_start < isize && isspace(in[word_start]))
> + word_start++;
> + /* reached the end of the input before next word? */
> + if (word_start >= isize)
> + break;
> +
> + /* Find the end of this word */
> + word_end = word_start;
> + while (word_end < isize && !isspace(in[word_end]))
> + word_end++;
> +
> + /* Copy to a tmp NULL terminated string */
> + word_len = word_end - word_start;
> + if (word_len > MAX_WORD_SIZE)
> + return -EINVAL;
> + memcpy(tmp, in + word_start, word_len);
> + tmp[word_len] = '\0';
> +
> + /*
> + * Convert from hex string, place in output. If fails to parse,
> + * just return -EINVAL because specific error code is only
> + * relevant for this one word, returning it would be confusing.
> + */
> + if (kstrtou8(tmp, 16, &byte))
> + return -EINVAL;
> + out[n_parsed++] = byte;
> +
> + word_start = word_end;
> + }
> + return n_parsed;
> +}
> +
> +#define CMDS_AND_DATA_SIZE ((EC_MAILBOX_DATA_SIZE) + 3)
> +
> +static ssize_t raw_write(struct file *file, const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + char *buf = debug_info->formatted_data;
> + struct wilco_ec_message msg;
> + u8 request_data[CMDS_AND_DATA_SIZE];
> + ssize_t kcount;
> + int ret;
> +
> + if (count > FORMATTED_BUFFER_SIZE)
> + return -EINVAL;
> +
> + kcount = simple_write_to_buffer(buf, FORMATTED_BUFFER_SIZE, ppos,
> + user_buf, count);
> + if (kcount < 0)
> + return kcount;
> +
> + ret = parse_hex_sentence(buf, kcount, request_data, CMDS_AND_DATA_SIZE);
> + if (ret < 0)
> + return ret;
> + /* Need at least three bytes for type and command */
> + if (ret < 3)
> + return -EINVAL;
> +
> + /* Clear response data buffer */
> + memset(debug_info->raw_data, '\0', EC_MAILBOX_DATA_SIZE_EXTENDED);
> +
> + msg.type = request_data[0] << 8 | request_data[1];
> + msg.flags = WILCO_EC_FLAG_RAW;
> + msg.command = request_data[2];
> + msg.request_data = ret > 3 ? request_data + 3 : NULL;
> + msg.request_size = ret - 3;
> + msg.response_data = debug_info->raw_data;
> + msg.response_size = EC_MAILBOX_DATA_SIZE;
> +
> + /* Telemetry commands use extended response data */
> + if (msg.type == WILCO_EC_MSG_TELEMETRY) {
> + msg.flags |= WILCO_EC_FLAG_EXTENDED_DATA;
> + msg.response_size = EC_MAILBOX_DATA_SIZE_EXTENDED;
> + }
> +
> + ret = wilco_ec_mailbox(debug_info->ec, &msg);
> + if (ret < 0)
> + return ret;
> + debug_info->response_size = ret;
> +
> + return count;
> +}
> +
> +/**
> + * wilco_ec_raw_show() - Show result from previous call to raw_store()
> + * @dev: Device representing the EC
> + * @attr: The attribute in question
> + * @buf: Output buffer to be filled
> + *
> + * Example usage:
> + * // Call raw_store(), read EC info type 3 (EC firmware build date)
> + * # echo 00 f0 38 00 03 00 > raw
> + * // Call this function, view the result. The decoded ASCII result
> + * // "12/21/18" is included after the raw hex.
> + * # cat raw
> + * 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 .12/21/18.8.../.
> + *
> + * Return: Number of bytes written to output, negative error code on failure
> + */
> +static ssize_t raw_read(struct file *file, char __user *user_buf, size_t count,
> + loff_t *ppos)
> +{
> + int fmt_len = 0;
> +
> + if (debug_info->response_size) {
> + fmt_len = hex_dump_to_buffer(debug_info->raw_data,
> + debug_info->response_size,
> + 16, 1, debug_info->formatted_data,
> + FORMATTED_BUFFER_SIZE, true);
> + /* Only return response the first time it is read */
> + debug_info->response_size = 0;
> + }
> +
> + return simple_read_from_buffer(user_buf, count, ppos,
> + debug_info->formatted_data, fmt_len);
> +}
> +
> +static const struct file_operations fops_raw = {
> + .owner = THIS_MODULE,
> + .read = raw_read,
> + .write = raw_write,
> + .llseek = no_llseek,
> +};
> +
> +int wilco_ec_debugfs_init(struct wilco_ec_device *ec)
> +{
> + debug_info = devm_kzalloc(ec->dev, sizeof(*debug_info), GFP_KERNEL);
> + if (!debug_info)
> + return -ENOMEM;

Add an empty line here.

> + debug_info->ec = ec;
> +
> + debug_info->dir = debugfs_create_dir("wilco_ec", NULL);
> + if (!debug_info->dir)
> + return -ENOMEM;
> +
> + if (!debugfs_create_file("raw", 0644, debug_info->dir,
> + NULL, &fops_raw)) {
> + debugfs_remove_recursive(debug_info->dir);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +void wilco_ec_debugfs_remove(struct wilco_ec_device *ec)
> +{
> + if (debug_info) {
> + debugfs_remove_recursive(debug_info->dir);
> + devm_kfree(ec->dev, debug_info); /* needed? */

If you create a module_platform_driver that won't be needed, no.

> + }
> +}
> +
> +#else /* CONFIG_WILCO_EC_SYSFS_RAW */
> +
> +int wilco_ec_debugfs_init(struct wilco_ec_device *ec)
> +{
> + return 0;
> +}
> +
> +void wilco_ec_debugfs_remove(struct wilco_ec_device *ec) {}
> +
> +#endif /* CONFIG_WILCO_EC_SYSFS_RAW */
> diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
> index 5477b8802f81..3298eabe73bc 100644
> --- a/include/linux/platform_data/wilco-ec.h
> +++ b/include/linux/platform_data/wilco-ec.h
> @@ -135,4 +135,7 @@ struct wilco_ec_response {
> */
> int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg);
>
> +int wilco_ec_debugfs_init(struct wilco_ec_device *ec);
> +void wilco_ec_debugfs_remove(struct wilco_ec_device *ec);
> +
> #endif /* WILCO_EC_H */
> --
> 2.20.1.321.g9e740568ce-goog
>

Next message: Marc Zyngier: "Re: [PATCH 1/4] dt-binding: irq: imx-irqsteer: use irq number per channel instead of group number"
Previous message: Christian Brauner: "Re: linux-next: manual merge of the pidfd tree with the y2038 tree"
In reply to: Nick Crews: "[PATCH v3 3/9] platform/chrome: Add support for raw commands in debugfs"
Next in thread: Nick Crews: "[PATCH v3 5/9] platform/chrome: rtc: Add RTC driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]