Re: [PATCH] regulator: qcom-smd: Batch up requests for disabled regulators

From: Jeffrey Hugo
Date: Tue Jan 22 2019 - 14:25:10 EST

Hi Bjorn,

This seems intresting, but I'm not sure I fully understand it yet.

On 1/22/2019 12:01 PM, Bjorn Andersson wrote:
In some scenarios the early stages of the boot chain has configured
regulators to be in a required state, but the later stages has skipped
to inform the RPM about it's requirements.
So if I understand this correctly, the boot chain turned on and configured the regulator, but didn't give the RPM its vote, so the RPM doesn't know anything and just assumes the default state - off/unconfigured. Right?

If we are in Linux, is that boot chain "vote" valid anymore?

But as the SMD RPM regulators are being initialized voltage change
requests will be issued to align the voltage with the valid ranges. The
RPM aggregates all parameters for the specific regulator, the voltage
will be adjusted and the "enabled" state will be "off" - and the
regulator is turned off.

So, this would happen when Linux is processing the constraints from DT for example, but is still initing the devices, so there are no consumers and thus the device is not enabled, but the voltage configuration is sent to the RPM to ensure the constraints are met?


This patch addresses this problem by caching the requested enable state,
voltage and load and send the parameters in a batch, depending on the
enable state - effectively delaying the voltage request for disabled
regulators.

I'm curious, would any sort of additional latency be expected because the RPM has delayed work to the enable "stage"?

While I suspect there are benefits to this change regardless, it seems like what you are describing above should be addressed by "regulator-boot-on" in the DT. Why is that not a valid solution for this scenario?


Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/regulator/qcom_smd-regulator.c | 104 ++++++++++++++++---------
1 file changed, 69 insertions(+), 35 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index f5bca77d67c1..dfdc67da5cec 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -31,6 +31,11 @@ struct qcom_rpm_reg {
int is_enabled;
int uV;
+ u32 load;
+
+ unsigned int enabled_updated:1;
+ unsigned int uv_updated:1;
+ unsigned int load_updated:1;
};
struct rpm_regulator_req {
@@ -43,30 +48,59 @@ struct rpm_regulator_req {
#define RPM_KEY_UV 0x00007675 /* "uv" */
#define RPM_KEY_MA 0x0000616d /* "ma" */
-static int rpm_reg_write_active(struct qcom_rpm_reg *vreg,
- struct rpm_regulator_req *req,
- size_t size)
+static int rpm_reg_write_active(struct qcom_rpm_reg *vreg)
{
- return qcom_rpm_smd_write(vreg->rpm,
- QCOM_SMD_RPM_ACTIVE_STATE,
- vreg->type,
- vreg->id,
- req, size);
+ struct rpm_regulator_req req[3];
+ int reqlen = 0;
+ int ret;
+
+ if (vreg->enabled_updated) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_SWEN);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->is_enabled);
+ reqlen++;
+ }
+
+ if (vreg->uv_updated && vreg->is_enabled) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_UV);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->uV);
+ reqlen++;
+ }
+
+ if (vreg->load_updated && vreg->is_enabled) {
+ req[reqlen].key = cpu_to_le32(RPM_KEY_MA);
+ req[reqlen].nbytes = cpu_to_le32(sizeof(u32));
+ req[reqlen].value = cpu_to_le32(vreg->load / 1000);
+ reqlen++;
+ }
+
+ if (!reqlen)
+ return 0;
+
+ ret = qcom_rpm_smd_write(vreg->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ vreg->type, vreg->id,
+ req, sizeof(req[0]) * reqlen);
+ if (!ret) {
+ vreg->enabled_updated = 0;
+ vreg->uv_updated = 0;
+ vreg->load_updated = 0;
+ }
+
+ return ret;
}
static int rpm_reg_enable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
int ret;
- req.key = cpu_to_le32(RPM_KEY_SWEN);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(1);
+ vreg->is_enabled = 1;
+ vreg->enabled_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->is_enabled = 1;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->is_enabled = 0;
return ret;
}
@@ -81,16 +115,14 @@ static int rpm_reg_is_enabled(struct regulator_dev *rdev)
static int rpm_reg_disable(struct regulator_dev *rdev)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
int ret;
- req.key = cpu_to_le32(RPM_KEY_SWEN);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = 0;
+ vreg->is_enabled = 0;
+ vreg->enabled_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->is_enabled = 0;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->is_enabled = 1;
return ret;
}
@@ -108,16 +140,15 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
unsigned *selector)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
- int ret = 0;
+ int ret;
+ int old_uV = vreg->uV;
- req.key = cpu_to_le32(RPM_KEY_UV);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(min_uV);
+ vreg->uV = min_uV;
+ vreg->uv_updated = 1;
- ret = rpm_reg_write_active(vreg, &req, sizeof(req));
- if (!ret)
- vreg->uV = min_uV;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->uV = old_uV;
return ret;
}
@@ -125,13 +156,16 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev,
static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA)
{
struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
- struct rpm_regulator_req req;
+ u32 old_load = vreg->load;
+ int ret;
- req.key = cpu_to_le32(RPM_KEY_MA);
- req.nbytes = cpu_to_le32(sizeof(u32));
- req.value = cpu_to_le32(load_uA / 1000);
+ vreg->load = load_uA;
+ vreg->load_updated = 1;
+ ret = rpm_reg_write_active(vreg);
+ if (ret)
+ vreg->load = old_load;
- return rpm_reg_write_active(vreg, &req, sizeof(req));
+ return ret;
}
static const struct regulator_ops rpm_smps_ldo_ops = {



--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.