[PATCH V8 4/5] i2c: tegra: Update transfer timeout

From: Sowjanya Komatineni
Date: Thu Jan 31 2019 - 01:16:53 EST


Tegra194 allows max of 64K bytes and Tegra186 and prior allows
max of 4K bytes of transfer per packet.

one sec timeout is not enough for transfers more than 10K bytes
at STD bus rate.

This patch updates I2C transfer timeout based on the transfer size
and I2C bus rate to allow enough time during max transfer size at
lower bus speed.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
[V8] : Added comment with explaination of xfer time calculation
[V5/V6/V7] : Same as V4
[V4] : V4 series includes bus clear support and this patch is updated with
fixed timeout of 1sec for bus clear operation.
[V3] : Same as V2
[V2] : Added this patch in V2 series to allow enough time for data transfer
to happen.
This patch has dependency with DMA patch as TEGRA_I2C_TIMEOUT define
takes argument with this patch.

drivers/i2c/busses/i2c-tegra.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 025d63972e50..435518cd91b6 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -25,7 +25,7 @@
#include <linux/pm_runtime.h>
#include <linux/reset.h>

-#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
+#define TEGRA_I2C_TIMEOUT(ms) (msecs_to_jiffies(ms))
#define BYTES_PER_FIFO_WORD 4

#define I2C_CNFG 0x000
@@ -901,8 +901,9 @@ static int tegra_i2c_issue_bus_clear(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);

- time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- TEGRA_I2C_TIMEOUT);
+ time_left = wait_for_completion_timeout(
+ &i2c_dev->msg_complete,
+ TEGRA_I2C_TIMEOUT(1000));
if (time_left == 0) {
dev_err(i2c_dev->dev, "timed out for bus clear\n");
return -ETIMEDOUT;
@@ -930,6 +931,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
int err = 0;
bool dma = false;
struct dma_chan *chan;
+ u16 xfer_time = 100;

tegra_i2c_flush_fifos(i2c_dev);

@@ -945,6 +947,13 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;

xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
+ /*
+ * Transfer time = Total bits / transfer rate
+ * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
+ */
+ xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * 1000,
+ i2c_dev->bus_clk_rate);
+
dma = (xfer_size > I2C_PIO_MODE_MAX_LEN);
if (dma) {
err = tegra_i2c_init_dma_param(i2c_dev);
@@ -1063,7 +1072,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,

time_left = wait_for_completion_timeout(
&i2c_dev->dma_complete,
- TEGRA_I2C_TIMEOUT);
+ TEGRA_I2C_TIMEOUT(xfer_time));

if (time_left == 0) {
dev_err(i2c_dev->dev, "DMA transfer timeout\n");
@@ -1086,7 +1095,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
}

time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- TEGRA_I2C_TIMEOUT);
+ TEGRA_I2C_TIMEOUT(xfer_time));
tegra_i2c_mask_irq(i2c_dev, int_mask);

if (time_left == 0) {
--
2.7.4