Re: [PATCH v6 06/20] iommu/io-pgtable-arm-v7s: Extend MediaTek 4GB Mode

From: Yong Wu
Date: Thu Jan 31 2019 - 01:59:14 EST


On Wed, 2019-01-30 at 10:28 -0800, Evan Green wrote:
> On Mon, Dec 31, 2018 at 7:57 PM Yong Wu <yong.wu@xxxxxxxxxxxx> wrote:
> >
> > MediaTek extend the arm v7s descriptor to support the dram over 4GB.
> >
> > In the mt2712 and mt8173, it's called "4GB mode", the physical address
> > is from 0x4000_0000 to 0x1_3fff_ffff, but from EMI point of view, it
> > is remapped to high address from 0x1_0000_0000 to 0x1_ffff_ffff, the
> > bit32 is always enabled. thus, in the M4U, we always enable the bit9
> > for all PTEs which means to enable bit32 of physical address.
>
> I got a little lost here. I get that you're trying to explain why you
> always used to set bit32 of the physical address. But I don't totally
> get the part about physical addresses being from 0x4000_0000 -
> 0x1_3fff_ffff, but also from 0x1_0000_0000-0x1_ffff_ffff. Are you
> saying that the physical addresses from the iommu's perspective were
> always >0x1_0000_0000?

Yes. From the IOMMU's perspective, the Physical address is from
0x1_0000_0000 to 0x1_ffff_ffff.

> But then from whose perspective is it 0x4000_0000? ...

I guess from SW point view. it is from 0x4000_0000 to 0x1_3fff_ffff.

If 4GB mode is enabled, the memory property in dts like this:

memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0x00000001 0x00000000>;
};

> oh, or you're saying there was some sort of remapping
> facility that moved the physical addresses around?
>
> >
> > but in mt8183, M4U support the dram from 0x4000_0000 to 0x3_ffff_ffff
> > which isn't remaped. We extend the PTEs: the bit9 represent bit32 of
> > PA and the bit4 represent bit33 of PA. Meanwhile the iova still is
> > 32bits.
> >
> > In order to unify code, in the "4GB mode", we add the bit32 for the
> > physical address manually in our driver.
> >
> > Correspondingly, Adding bit32 and bit33 for the PA in the iova_to_phys
> > has to been moved into v7s.
> >
> > Regarding whether the pagetable address could be over 4GB, the mt8183
> > support it while the previous mt8173 don't. thus keep it as is.
> >
> > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
> > ---
> > drivers/iommu/io-pgtable-arm-v7s.c | 31 ++++++++++++++++++++++++-------
> > drivers/iommu/io-pgtable.h | 7 +++----
> > drivers/iommu/mtk_iommu.c | 14 ++++++++------
> > drivers/iommu/mtk_iommu.h | 1 +
> > 4 files changed, 36 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
> > index 11d8505..8803a35 100644
> > --- a/drivers/iommu/io-pgtable-arm-v7s.c
> > +++ b/drivers/iommu/io-pgtable-arm-v7s.c
> > @@ -124,7 +124,9 @@
> > #define ARM_V7S_TEX_MASK 0x7
> > #define ARM_V7S_ATTR_TEX(val) (((val) & ARM_V7S_TEX_MASK) << ARM_V7S_TEX_SHIFT)
> >
> > -#define ARM_V7S_ATTR_MTK_4GB BIT(9) /* MTK extend it for 4GB mode */
> > +/* MediaTek extend the two bits below for over 4GB mode */
> > +#define ARM_V7S_ATTR_MTK_PA_BIT32 BIT(9)
> > +#define ARM_V7S_ATTR_MTK_PA_BIT33 BIT(4)
>
> If other vendors start doing stuff like this we'll need a more generic
> way to handle this... but I guess until we see a pattern this is okay.
>
> >
> > /* *well, except for TEX on level 2 large pages, of course :( */
> > #define ARM_V7S_CONT_PAGE_TEX_SHIFT 6
> > @@ -183,13 +185,22 @@ static dma_addr_t __arm_v7s_dma_addr(void *pages)
> > static arm_v7s_iopte paddr_to_iopte(phys_addr_t paddr, int lvl,
> > struct io_pgtable_cfg *cfg)
> > {
> > - return paddr & ARM_V7S_LVL_MASK(lvl);
> > + arm_v7s_iopte pte = paddr & ARM_V7S_LVL_MASK(lvl);
> > +
> > + if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB) {
> > + if (paddr & BIT_ULL(32))
> > + pte |= ARM_V7S_ATTR_MTK_PA_BIT32;
> > + if (paddr & BIT_ULL(33))
> > + pte |= ARM_V7S_ATTR_MTK_PA_BIT33;
> > + }
> > + return pte;
> > }
> >
> > static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
> > struct io_pgtable_cfg *cfg)
> > {
> > arm_v7s_iopte mask;
> > + phys_addr_t paddr;
> >
> > if (ARM_V7S_PTE_IS_TABLE(pte, lvl))
> > mask = ARM_V7S_TABLE_MASK;
> > @@ -198,7 +209,14 @@ static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
> > else
> > mask = ARM_V7S_LVL_MASK(lvl);
> >
> > - return pte & mask;
> > + paddr = pte & mask;
> > + if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB) {
> > + if (pte & ARM_V7S_ATTR_MTK_PA_BIT32)
> > + paddr |= BIT_ULL(32);
> > + if (pte & ARM_V7S_ATTR_MTK_PA_BIT33)
> > + paddr |= BIT_ULL(33);
> > + }
> > + return paddr;
> > }
> >
> > static arm_v7s_iopte *iopte_deref(arm_v7s_iopte pte, int lvl,
> > @@ -315,9 +333,6 @@ static arm_v7s_iopte arm_v7s_prot_to_pte(int prot, int lvl,
> > if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
> > pte |= ARM_V7S_ATTR_NS_SECTION;
> >
> > - if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)
> > - pte |= ARM_V7S_ATTR_MTK_4GB;
> > -
>
> So despite getting lost in the details, I guess the reason it's okay
> that this goes from unconditional to conditional on bit32 is that
> before, with the older chips, all physical addresses were above 4GB,
> so we'll always see PA's above 4GB?
>
> > return pte;
> > }
> >
> > @@ -504,7 +519,9 @@ static int arm_v7s_map(struct io_pgtable_ops *ops, unsigned long iova,
> > if (!(prot & (IOMMU_READ | IOMMU_WRITE)))
> > return 0;
> >
> > - if (WARN_ON(upper_32_bits(iova) || upper_32_bits(paddr)))
> > + if (WARN_ON(upper_32_bits(iova)) ||
> > + WARN_ON(upper_32_bits(paddr) &&
> > + !(iop->cfg.quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)))
> > return -ERANGE;
> >
> > ret = __arm_v7s_map(data, iova, paddr, size, prot, 1, data->pgd);
> > diff --git a/drivers/iommu/io-pgtable.h b/drivers/iommu/io-pgtable.h
> > index 47d5ae5..69db115 100644
> > --- a/drivers/iommu/io-pgtable.h
> > +++ b/drivers/iommu/io-pgtable.h
> > @@ -62,10 +62,9 @@ struct io_pgtable_cfg {
> > * (unmapped) entries but the hardware might do so anyway, perform
> > * TLB maintenance when mapping as well as when unmapping.
> > *
> > - * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
> > - * PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
> > - * when the SoC is in "4GB mode" and they can only access the high
> > - * remap of DRAM (0x1_00000000 to 0x1_ffffffff).
> > + * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) MediaTek IOMMUs extend
> > + * to support up to 34 bits PA where the bit32 and bit33 are
> > + * encoded in the bit9 and bit4 of the PTE respectively.
> > *
> > * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
> > * be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 189d1b5..ae1aa5a 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -367,12 +367,16 @@ static int mtk_iommu_map(struct iommu_domain *domain, unsigned long iova,
> > phys_addr_t paddr, size_t size, int prot)
> > {
> > struct mtk_iommu_domain *dom = to_mtk_domain(domain);
> > + struct mtk_iommu_data *data = mtk_iommu_get_m4u_data();
> > unsigned long flags;
> > int ret;
> >
> > + /* The "4GB mode" M4U physically can not use the lower remap of Dram. */
> > + if (data->plat_data->has_4gb_mode && data->enable_4GB)
> > + paddr |= BIT_ULL(32);
> > +
>
> Ok here's where I get lost. How is this okay? Is the same physical RAM
> accessible at multiple locations in the physical address space? Won't
> this map an iova to a different pa than the one requested?

In 4GB mode, HW will remap 0x4000_0000-0x1_3fff_ffff to 0x1_0000_0000-
0x1_ffff_ffff. M4U help multimedia HW access dram, thus from M4U point
of view, the dram always is 0x1_0000_0000 to 0x1_ffff_ffff.

The detailed mapping relationship is like this:

0x4000_0000 -0xffff_ffff map to 0x1_4000_0000 - 0x1_ffff_ffff.
0x1_0000_0000-0x1_3fff_ffff map to 0x1_0000_0000 - 0x1_3fff_ffff.

Thus, we can only add bit32 for the PA in the 4GB mode.

>
> Also, you could have rolled the has_4gb_mode check into whether or not
> you set enable_4GB. Then you're doing the check for has_4gb_mode once,
> rather than on every map call.

"has_4gb_mode" means this SoC support 4GB mode.
"enable_4GB" means whether the current dram size is 4GB.

> -Evan