[PATCH v3 0/3] add support for PMS7003 PM sensor

From: Tomasz Duszynski
Date: Fri Feb 01 2019 - 16:58:37 EST

This patch series adds support for Plantower PMS7003 PM matter sensor.

Unfortunately datasheet is not available for download from the Plantower
website so one needs to find it elsewhere, for instance here:


* fix whitespaces
* drop unused printk format specifier
* make vcc-supply mandatory in dt binding
* use a generic node name (air-pollution-sensor) instead of a sensor model

* check number of bytes returned from serdev_device_write()
(due to changes in linux 5.0 serdev api)
* add missing pins descriptions to the driver binding
* keep commands in the lookup table
* buffer data and process everything in one go instead of using state machine
* keep pm offset in channel address to simplify reading measurements

Tomasz Duszynski (3):
iio: chemical: add support for Plantower PMS7003 sensor
dt-bindings: add Plantower to the vendor prefixes
dt-bindings: iio: chemical: pms7003: add device tree support

.../iio/chemical/plantower,pms7003.txt | 20 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/iio/chemical/Kconfig | 10 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/pms7003.c | 340 ++++++++++++++++++
5 files changed, 372 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
create mode 100644 drivers/iio/chemical/pms7003.c