[PATCH v4 6/8] dt-bindings: i2c: iproc: add "brcm,iproc-nic-i2c" compatible string

[Ray Jui]

From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>

Update iProc I2C binding document to add new compatible string
"brcm,iproc-nic-i2c". Optional property "brcm,ape-hsls-addr-mask" is
also added that allows configuration of the host view into the APE's
address for "brcm,iproc-nic-i2c"

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
index d3a3620b1f06..02e82d20239e 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -3,7 +3,7 @@ Broadcom iProc I2C controller
 Required properties:
 
 - compatible:
-    Must be "brcm,iproc-i2c"
+    Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
 
 - reg:
     Define the base and range of the I/O address space that contain the iProc
@@ -24,6 +24,9 @@ Optional properties:
     Should contain the I2C interrupt. If unspecified, driver will fall back to
     polling mode
 
+- brcm,ape-hsls-addr-mask:
+    Required for "brcm,iproc-nic-i2c". Host view of address mask into the
+    'APE' co-processor
 
 Example:
 	i2c0: i2c@18008000 {
-- 
2.17.1