[PATCH 2/2] PCI: imx6: limit DBI register length

From: Stefan Agner
Date: Wed Feb 06 2019 - 04:56:11 EST


Define the length of the DBI registers. This makes sure that
the kernel does not access registers beyond that point, avoiding
the following abort on a i.MX 6Quad:
# cat /sys/devices/soc0/soc/1ffc000.pcie/pci0000\:00/0000\:00\:00.0/config
[ 100.021433] Unhandled fault: imprecise external abort (0x1406) at 0xb6ea7000
...
[ 100.056423] PC is at dw_pcie_read+0x50/0x84
[ 100.060790] LR is at dw_pcie_rd_own_conf+0x44/0x48
...

Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
Changes in v3:
- Rebase on pci/dwc
Changes in v4:
- Rebase on pci/dwc
Changes in v5:
- Rebased ontop of pci/dwc
- Use DBI length of 0x200

drivers/pci/controller/dwc/pci-imx6.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index c1d434ba3642..1ef7be1232f3 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -55,6 +55,7 @@ enum imx6_pcie_variants {
struct imx6_pcie_drvdata {
enum imx6_pcie_variants variant;
u32 flags;
+ int dbi_length;
};

struct imx6_pcie {
@@ -1087,6 +1088,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
break;
}

+ pci->dbi_length = imx6_pcie->drvdata->dbi_length;
+
/* Grab turnoff reset */
imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
if (IS_ERR(imx6_pcie->turnoff_reset)) {
@@ -1170,6 +1173,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.variant = IMX6Q,
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
+ .dbi_length = 0x200,
},
[IMX6SX] = {
.variant = IMX6SX,
--
2.20.1