[PATCH v4 7/7] arm64: dts: qcom: msm8998: Add UFS nodes

[Marc Gonzalez]

Add UFS host controller and PHY DT nodes for msm8998.

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 19 +++++++
 arch/arm64/boot/dts/qcom/msm8998.dtsi     | 62 +++++++++++++++++++++++
 2 files changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 19775cae1381..3e911488d4f3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -284,3 +284,22 @@
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
 };
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+	vdda-phy-max-microamp = <51400>;
+	vdda-pll-max-microamp = <14600>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 043ff2d2643c..d69401152089 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -983,6 +983,68 @@
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		ufshc: ufshc@1da4000 {
+			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x01da4000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufsphy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_GDSC>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK1>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			resets = <&gcc GCC_UFS_BCR>;
+			reset-names = "rst";
+		};
+
+		ufsphy: phy@1da7000 {
+			compatible = "qcom,msm8998-qmp-ufs-phy";
+			reg = <0x01da7000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-names = "ref", "ref_aux";
+			clocks =
+				<&gcc GCC_UFS_CLKREF_CLK>,
+				<&gcc GCC_UFS_PHY_AUX_CLK>;
+
+			ufsphy_lanes: lanes@1da7400 {
+				reg = <0x01da7400 0x128>,
+				      <0x01da7600 0x1fc>,
+				      <0x01da7c00 0x1dc>,
+				      <0x01da7800 0x128>,
+				      <0x01da7a00 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
 
-- 
2.17.1