[RFC 5/5] arm64: dts: imx8mq: Add the opp table and the cpu-supply nodes

[Abel Vesa]

Add the opp table containing only non over drive opps.
Also add the cpu-supply nodes for the A53 cores in the EVK board.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 17 +++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi    | 23 +++++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf..114359e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,23 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+};
+
+&A53_0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&sw1a_reg>;
 };
 
 &fec1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 1a89062..89b2d5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -91,6 +91,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_1: cpu@1 {
@@ -101,6 +102,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_2: cpu@2 {
@@ -111,6 +113,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_3: cpu@3 {
@@ -121,6 +124,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -666,6 +670,25 @@
 			status = "disabled";
 		};
 
+
+		a53_0_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <900000>;
+				clock-latency-ns = <150000>;
+			};
+
+			opp-1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <900000>;
+				clock-latency-ns = <150000>;
+				opp-suspend;
+			};
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,	/* GIC Dist */
-- 
2.7.4