RE: [PATCH 1/3] dt-bindings: fsl: scu: add general interrupt support

[Anson Huang]

I just update the patch series and also add RTC alarm support to use i.MX SCU general interrupt as an example, because RTC alarm patch depends on it, so I sent them together in ONE path series, please just help review the V2 patch series, thanks.

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月12日 20:39
> To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> Aisheng Dong <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel
> Baluta <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH 1/3] dt-bindings: fsl: scu: add general interrupt support
> 
> Gentle ping...
> 
> Best Regards!
> Anson Huang
> 
> > -----Original Message-----
> > From: Anson Huang
> > Sent: 2019年1月23日 16:01
> > To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> > s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> > Aisheng Dong <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel
> > Baluta <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: dl-linux-imx <linux-imx@xxxxxxx>
> > Subject: [PATCH 1/3] dt-bindings: fsl: scu: add general interrupt
> > support
> >
> > Add scu general interrupt function support.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > ---
> >  .../devicetree/bindings/arm/freescale/fsl,scu.txt      | 18 ++++++++++++-----
> -
> >  1 file changed, 12 insertions(+), 6 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index fd2bed2..3c976ac 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -22,9 +22,11 @@ Required properties:
> >  -------------------
> >  - compatible:	should be "fsl,imx-scu".
> >  - mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
> > -			       "rx0", "rx1", "rx2", "rx3".
> > -- mboxes:	List of phandle of 4 MU channels for tx and 4 MU channels
> > -		for rx. All 8 MU channels must be in the same MU instance.
> > +			       "rx0", "rx1", "rx2", "rx3",
> > +			       "gi3".
> > +- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
> > +		rx, and 1 MU channel for general interrupt. All 9 MU channels
> > +		must be in the same MU instance.
> >  		Cross instances are not allowed. The MU instance can only
> >  		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
> need
> >  		to make sure use the one which is not conflict with other @@
> > -34,6 +36,7 @@ Required properties:
> >  		Channel 1 must be "tx1" or "rx1".
> >  		Channel 2 must be "tx2" or "rx2".
> >  		Channel 3 must be "tx3" or "rx3".
> > +		General interrupt channel must be "gi3".
> >  		e.g.
> >  		mboxes = <&lsio_mu1 0 0
> >  			  &lsio_mu1 0 1
> > @@ -42,7 +45,8 @@ Required properties:
> >  			  &lsio_mu1 1 0
> >  			  &lsio_mu1 1 1
> >  			  &lsio_mu1 1 2
> > -			  &lsio_mu1 1 3>;
> > +			  &lsio_mu1 1 3
> > +			  &lsio_mu1 3 3>;
> >  		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
> >  		for detailed mailbox binding.
> >
> > @@ -130,7 +134,8 @@ firmware {
> >  	scu {
> >  		compatible = "fsl,imx-scu";
> >  		mbox-names = "tx0", "tx1", "tx2", "tx3",
> > -			     "rx0", "rx1", "rx2", "rx3";
> > +			     "rx0", "rx1", "rx2", "rx3",
> > +			     "gi3";
> >  		mboxes = <&lsio_mu1 0 0
> >  			  &lsio_mu1 0 1
> >  			  &lsio_mu1 0 2
> > @@ -138,7 +143,8 @@ firmware {
> >  			  &lsio_mu1 1 0
> >  			  &lsio_mu1 1 1
> >  			  &lsio_mu1 1 2
> > -			  &lsio_mu1 1 3>;
> > +			  &lsio_mu1 1 3
> > +			  &lsio_mu1 3 3>;
> >
> >  		clk: clk {
> >  			compatible = "fsl,imx8qxp-clk";
> > --
> > 2.7.4