[PATCH V2 2/4] watchdog: imx_sc: Add i.MX system controller watchdog support

From: Anson Huang
Date: Sun Feb 17 2019 - 21:02:12 EST


i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and watchdog etc..

This patch adds i.MX system controller watchdog driver support,
watchdog operation needs to be done in secure EL3 mode via
ARM-Trusted-Firmware, using SMC call, CPU will trap into
ARM-Trusted-Firmware and then it will request system controller
to do watchdog operation via IPC.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
drivers/watchdog/Kconfig | 13 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/imx_sc_wdt.c | 187 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 201 insertions(+)
create mode 100644 drivers/watchdog/imx_sc_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 65c3c42..5c5b8ba 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -625,6 +625,19 @@ config IMX2_WDT
To compile this driver as a module, choose M here: the
module will be called imx2_wdt.

+config IMX_SC_WDT
+ tristate "IMX SC Watchdog"
+ depends on ARCH_MXC || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This is the driver for the system controller watchdog
+ on the NXP i.MX SoCs with system controller inside.
+ If you have one of these processors and wish to have
+ watchdog support enabled, say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx_sc_wdt.
+
config UX500_WATCHDOG
tristate "ST-Ericsson Ux500 watchdog"
depends on MFD_DB8500_PRCMU
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 4e78a8c..0c9da63 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
new file mode 100644
index 0000000..5af6cf2
--- /dev/null
+++ b/drivers/watchdog/imx_sc_wdt.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT 60
+/*
+ * Software timer tick implemented in scfw side, support 10ms to 0xffffffff ms
+ * in theory, but for normal case, 1s~128s is enough, you can change this max
+ * value in case it's not enough.
+ */
+#define MAX_TIMEOUT 128
+
+#define IMX_SIP_TIMER 0xC2000002
+#define IMX_SIP_TIMER_START_WDOG 0x01
+#define IMX_SIP_TIMER_STOP_WDOG 0x02
+#define IMX_SIP_TIMER_SET_WDOG_ACT 0x03
+#define IMX_SIP_TIMER_PING_WDOG 0x04
+#define IMX_SIP_TIMER_SET_TIMEOUT_WDOG 0x05
+#define IMX_SIP_TIMER_GET_WDOG_STAT 0x06
+#define IMX_SIP_TIMER_SET_PRETIME_WDOG 0x07
+
+#define SC_TIMER_WDOG_ACTION_PARTITION 0
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0000);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int timeout = DEFAULT_TIMEOUT;
+module_param(timeout, uint, 0000);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+ __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+
+static int imx_sc_wdt_ping(struct watchdog_device *wdog)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_PING_WDOG,
+ 0, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int imx_sc_wdt_start(struct watchdog_device *wdog)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_START_WDOG,
+ 0, 0, 0, 0, 0, 0, &res);
+ if (res.a0)
+ return res.a0;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_WDOG_ACT,
+ SC_TIMER_WDOG_ACTION_PARTITION,
+ 0, 0, 0, 0, 0, &res);
+ return res.a0;
+}
+
+static int imx_sc_wdt_stop(struct watchdog_device *wdog)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_STOP_WDOG,
+ 0, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
+ unsigned int timeout)
+{
+ struct arm_smccc_res res;
+
+ wdog->timeout = timeout;
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_TIMEOUT_WDOG,
+ timeout * 1000, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static const struct watchdog_ops imx_sc_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = imx_sc_wdt_start,
+ .stop = imx_sc_wdt_stop,
+ .ping = imx_sc_wdt_ping,
+ .set_timeout = imx_sc_wdt_set_timeout,
+};
+
+static const struct watchdog_info imx_sc_wdt_info = {
+ .identity = "i.MX SC watchdog timer",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
+};
+
+static int imx_sc_wdt_probe(struct platform_device *pdev)
+{
+ struct watchdog_device *imx_sc_wdd;
+ int ret;
+
+ imx_sc_wdd = devm_kzalloc(&pdev->dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
+ if (!imx_sc_wdd)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, imx_sc_wdd);
+
+ imx_sc_wdd->info = &imx_sc_wdt_info;
+ imx_sc_wdd->ops = &imx_sc_wdt_ops;
+ imx_sc_wdd->min_timeout = 1;
+ imx_sc_wdd->max_timeout = MAX_TIMEOUT;
+ imx_sc_wdd->parent = &pdev->dev;
+
+ ret = watchdog_init_timeout(imx_sc_wdd, DEFAULT_TIMEOUT, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init the wdog timeout:%d\n",
+ ret);
+ return ret;
+ }
+
+ watchdog_stop_on_reboot(imx_sc_wdd);
+ watchdog_stop_on_unregister(imx_sc_wdd);
+
+ ret = devm_watchdog_register_device(&pdev->dev, imx_sc_wdd);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register watchdog device\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id imx_sc_wdt_dt_ids[] = {
+ { .compatible = "fsl,imx8qxp-sc-wdt", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_sc_wdt_dt_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int imx_sc_wdt_suspend(struct device *dev)
+{
+ struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+
+ if (watchdog_active(imx_sc_wdd))
+ imx_sc_wdt_stop(imx_sc_wdd);
+
+ return 0;
+}
+
+static int imx_sc_wdt_resume(struct device *dev)
+{
+ struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+
+ if (watchdog_active(imx_sc_wdd))
+ imx_sc_wdt_start(imx_sc_wdd);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(imx_sc_wdt_pm_ops,
+ imx_sc_wdt_suspend, imx_sc_wdt_resume);
+
+static struct platform_driver imx_sc_wdt_driver = {
+ .probe = imx_sc_wdt_probe,
+ .driver = {
+ .name = "imx-sc-wdt",
+ .of_match_table = imx_sc_wdt_dt_ids,
+ .pm = &imx_sc_wdt_pm_ops,
+ },
+};
+
+module_platform_driver(imx_sc_wdt_driver);
+
+MODULE_AUTHOR("Robin Gong <yibin.gong@xxxxxxx>");
+MODULE_DESCRIPTION("NXP i.MX system controller watchdog driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4