[PATCH v2 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning

From: Faiz Abbas
Date: Fri Mar 01 2019 - 03:35:28 EST


commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback") skips data resets during tuning operation. Because of this,
a data error or data finish interrupt might still arrive after a command
error has been handled and the mrq ended. This ends up with a "mmc0: Got
data interrupt 0x00000002 even though no data operation was in progress"
error message.

Fix this by adding a platform specific callback for command errors. Mark
the mrq as a failure but wait for a data interrupt instead of calling
finish_mrq().

Fixes: 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback")
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
drivers/mmc/host/sdhci-omap.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index b1a66ca3821a..67b361a403bc 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -797,6 +797,29 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
sdhci_reset(host, mask);
}

+void sdhci_omap_cmd_err(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ if (omap_host->is_tuning) {
+ /*
+ * Since we are not resetting data lines during tuning
+ * operation, data error or data complete interrupts
+ * might still arrive. Mark this request as a failure
+ * but still wait for the data interrupt
+ */
+ if (intmask & SDHCI_INT_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->cmd->error = -EILSEQ;
+
+ sdhci_finish_command(host);
+ } else {
+ sdhci_cmd_err(host, intmask, intmask_p);
+ }
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -807,6 +830,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
.reset = sdhci_omap_reset,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
+ .platform_cmd_err = sdhci_omap_cmd_err,
};

static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
--
2.19.2