[PATCH v8 0/2] Add basic and clock support for Mediatek MT8183 SoC

From: Erin Lo
Date: Mon Mar 11 2019 - 04:55:06 EST

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.

This series contains document bindings, device tree including interrupt, uart, clock, and pwrap.

Based on v5.0-rc1 and

Change in v8:
1. Fix interrupt-parent of pio node
2. Remove pinfunc.h and spi node patches

Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@1000b000 to pinctrl@10005000

Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names

Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes

Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and

Erin Lo (1):
dt-bindings: serial: Add compatible for Mediatek MT8183

.../devicetree/bindings/serial/mtk-uart.txt | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 31 ++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 335 +++++++++++++++++++++
4 files changed, 368 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi