[PATCH 4.14 125/135] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
From: Greg Kroah-Hartman
Date: Tue Mar 12 2019 - 13:23:50 EST
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.
Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").
It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.
Cc: <stable@xxxxxxxxxxxxxxx>
Reported-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
Suggested-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -60,7 +60,7 @@
};
emmc_pwrseq: pwrseq {
- pinctrl-0 = <&sd1_cd>;
+ pinctrl-0 = <&emmc_rstn>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
cpu0-supply = <&buck2_reg>;
};
-/* RSTN signal for eMMC */
-&sd1_cd {
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
&pinctrl_1 {
gpio_power_key: power_key {
samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
+
+ emmc_rstn: emmc-rstn {
+ samsung,pins = "gpk1-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&ehci {