Re: [PATCH v3 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning

[Faiz Abbas]

Hi Kishon,

On 19/03/19 1:37 PM, Kishon Vijay Abraham I wrote:
> Hi Faiz,
> 
> On 19/03/19 12:05 PM, Faiz Abbas wrote:
>> commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
>> callback") skips data resets during tuning operation. Because of this,
>> a data error or data finish interrupt might still arrive after a command
>> error has been handled and the mrq ended. This ends up with a "mmc0: Got
>> data interrupt 0x00000002 even though no data operation was in progress"
>> error message.
>>
>> Fix this by adding a platform specific callback for sdhci_irq. Mark the
>> mrq as a failure but wait for a data interrupt instead of calling
>> finish_mrq().
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
>> ---
>>  drivers/mmc/host/sdhci-omap.c | 36 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
>> index b1a66ca3821a..765873dff7ca 100644
>> --- a/drivers/mmc/host/sdhci-omap.c
>> +++ b/drivers/mmc/host/sdhci-omap.c
>> @@ -797,6 +797,41 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
>>  	sdhci_reset(host, mask);
>>  }
>>  
>> +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
>> +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
>> +
>> +static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
>> +{
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	if (omap_host->is_tuning && (intmask & CMD_ERR_MASK)) {
>> +
>> +		/*
>> +		 * Since we are not resetting data lines during tuning
>> +		 * operation, data error or data complete interrupts
>> +		 * might still arrive. Mark this request as a failure
>> +		 * but still wait for the data interrupt
>> +		 */
>> +		if (intmask & SDHCI_INT_TIMEOUT)
> 
> CMD_ERR_MASK doesn't have SDHCI_INT_TIMEOUT. So this will never be true.
> 

Yeah, need to SDHCI_INT_TIMEOUT to CMD_ERR_MASK.

Thanks,
Faiz