Re: [PATCH 1/2] mfd: cros_ec: Add host_sleep_event_v1 command

[Enric Balletbo Serra]

Hi Evan,Thanks for sending this upstream, one comment below.
Missatge de Evan Green <evgreen@xxxxxxxxxxxx> del dia dc., 20 de marÃ
2019 a les 22:24:
>
> Introduce the command and response structures for the second revision
> of the host sleep event. These structures are part of a new EC change
> that enables detection of failure to enter S0ix. The EC waits a
> kernel-specified timeout (or a default amount of time) for the S0_SLP
> pin to change, and wakes the system if that change does not occur in
> time.
>
> Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
>
> ---
>
>  include/linux/mfd/cros_ec_commands.h | 59 ++++++++++++++++++++++++++++

We're trying to sync kernel cros_ec_commands.h with the EC protocol at
https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h

Gwendal send a first patch [1] and a second version will be sent soon.
I don't see these definitions in the mentioned patch neither the
master ec_commands.h from the EC firmware repository. Is this a
feature that didn't land in the EC firmware yet?

[1] https://lkml.org/lkml/2019/2/27/723

Thanks,
 Enric

>  1 file changed, 59 insertions(+)
>
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index fc91082d4c35..4db1240c28a8 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -2729,6 +2729,65 @@ struct ec_params_host_sleep_event {
>         uint8_t sleep_event;
>  } __packed;
>
> +/*
> + * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
> + * transition failures
> + */
> +#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0
> +
> +/* Disable timeout detection for this sleep transition */
> +#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF
> +
> +struct ec_params_host_sleep_event_v1 {
> +       /* The type of sleep being entered or exited. */
> +       uint8_t sleep_event;
> +
> +       /* Padding */
> +       uint8_t reserved;
> +       union {
> +               /* Parameters that apply for suspend messages. */
> +               struct {
> +                       /*
> +                        * The timeout in milliseconds between when this message
> +                        * is received and when the EC will declare sleep
> +                        * transition failure if the sleep signal is not
> +                        * asserted.
> +                        */
> +                       uint16_t sleep_timeout_ms;
> +               } suspend_params;
> +
> +               /* Reserved space for non-suspend commands. */
> +               uint16_t reserved;
> +       } u;
> +} __packed;
> +
> +/* A timeout occurred when this bit is set */
> +#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
> +
> +/*
> + * The mask defining which bits correspond to the number of sleep transitions,
> + * as well as the maximum number of suspend line transitions that will be
> + * reported back to the host.
> + */
> +#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF
> +
> +struct ec_response_host_sleep_event_v1 {
> +       union {
> +               /* Response fields that apply for resume messages. */
> +               struct {
> +                       /*
> +                        * The number of sleep power signal transitions that
> +                        * occurred since the suspend message. The high bit
> +                        * indicates a timeout occurred.
> +                        */
> +                       uint32_t sleep_transitions;
> +               } resume_response;
> +
> +               /* Padding for non-resume responses. */
> +               uint32_t reserved;
> +       } u;
> +} __packed;
> +
>  /*****************************************************************************/
>  /* Smart battery pass-through */
>
> --
> 2.20.1
>