[PATCH 5.0 069/238] regulator: s2mps11: Fix steps for buck7, buck8 and LDO35

[Greg Kroah-Hartman]

5.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.

LDO35 uses 25 mV step, not 50 mV.  Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV.  Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).

Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/regulator/s2mps11.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -362,7 +362,7 @@ static const struct regulator_desc s2mps
 	regulator_desc_s2mps11_ldo(32, STEP_50_MV),
 	regulator_desc_s2mps11_ldo(33, STEP_50_MV),
 	regulator_desc_s2mps11_ldo(34, STEP_50_MV),
-	regulator_desc_s2mps11_ldo(35, STEP_50_MV),
+	regulator_desc_s2mps11_ldo(35, STEP_25_MV),
 	regulator_desc_s2mps11_ldo(36, STEP_50_MV),
 	regulator_desc_s2mps11_ldo(37, STEP_50_MV),
 	regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@@ -372,8 +372,8 @@ static const struct regulator_desc s2mps
 	regulator_desc_s2mps11_buck1_4(4),
 	regulator_desc_s2mps11_buck5,
 	regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
+	regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
+	regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
 	regulator_desc_s2mps11_buck9,
 	regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
 };