Re: [PATCH v7 6/7] platform/chrome: cros_ec: add EC host command support using rpmsg.

From: Enric Balletbo Serra
Date: Thu Mar 28 2019 - 07:16:11 EST


Hi

Thanks for sending this upstream, Some few comments and questions
below. Apart from these LGTM.

Missatge de Peter Shih <pihsun@xxxxxxxxxxxx> del dia dc., 27 de marÃ
2019 a les 6:17:
>
> From: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
>
> Add EC host command support through rpmsg.
>
> Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
> ---
> Changes from v6:
> - Make data for response aligned to 4 bytes.
>
> Changes from v5:
> - Change commit title.
> - Add documents for some structs, and fix all warning from
> scripts/kernel-doc.
> - Miscellaneous fixes based on feedback.
>
> Changes from v4:
> - Change from work queue to completion.
> - Change from matching using rpmsg id to device tree compatible, to
> support EC subdevices.
>
> Changes from v3:
> - Add host event support by adding an extra bytes at the start of IPC
> message to indicate the type of the message (host event or host
> command), since there's no additional irq that can be used for host
> event.
>
> Changes from v2:
> - Wait for ipi ack instead of depends on the behavior in mtk-rpmsg.
>
> Changes from v1:
> - Code format fix based on feedback for cros_ec_rpmsg.c.
> - Extract feature detection for SCP into separate patch (Patch 6).
> ---
> drivers/platform/chrome/Kconfig | 9 +
> drivers/platform/chrome/Makefile | 1 +
> drivers/platform/chrome/cros_ec_rpmsg.c | 265 ++++++++++++++++++++++++
> 3 files changed, 275 insertions(+)
> create mode 100644 drivers/platform/chrome/cros_ec_rpmsg.c
>
> diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> index 9186d81a51cc..5c48aa6da2f8 100644
> --- a/drivers/platform/chrome/Kconfig
> +++ b/drivers/platform/chrome/Kconfig
> @@ -59,6 +59,15 @@ config CROS_EC_I2C
> a checksum. Failing accesses will be retried three times to
> improve reliability.
>
> +config CROS_EC_RPMSG
> + tristate "ChromeOS Embedded Controller (rpmsg)"
> + depends on MFD_CROS_EC && RPMSG && OF
> + help
> + If you say Y here, you get support for talking to the ChromeOS EC
> + through rpmsg. This uses a simple byte-level protocol with a
> + checksum. Also since there's no addition EC-to-host interrupt, this
> + use a byte in message to distinguish host event from host command.
> +
> config CROS_EC_SPI
> tristate "ChromeOS Embedded Controller (SPI)"
> depends on MFD_CROS_EC && SPI
> diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> index 1e2f0029b597..4b69d795720d 100644
> --- a/drivers/platform/chrome/Makefile
> +++ b/drivers/platform/chrome/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
> obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
> obj-$(CONFIG_CHROMEOS_TBMC) += chromeos_tbmc.o
> obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
> +obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
> obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o
> cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> new file mode 100644
> index 000000000000..2ecae806cfc5
> --- /dev/null
> +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> @@ -0,0 +1,265 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright 2018 Google LLC.
> +
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mfd/cros_ec.h>
> +#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/rpmsg.h>
> +#include <linux/slab.h>
> +
> +#define EC_MSG_TIMEOUT_MS 200
> +#define HOST_COMMAND_MARK 1
> +#define HOST_EVENT_MARK 2
> +
> +/**
> + * struct cros_ec_rpmsg_response - rpmsg message format from from EC.
> + *
> + * @type: The type of message, should be either HOST_COMMAND_MARK or
> + * HOST_EVENT_MARK, representing that the message is a response to
> + * host command, or a host event.
> + * @data: ec_host_response for host command.
> + */
> +struct cros_ec_rpmsg_response {
> + u8 type;
> + u8 data[] __aligned(4);
> +};
> +
> +/**
> + * struct cros_ec_rpmsg - information about a EC over rpmsg.
> + *
> + * @rpdev: rpmsg device we are connected to
> + * @xfer_ack: completion for host command transfer.
> + * @host_event_work: Work struct for pending host event.
> + */
> +struct cros_ec_rpmsg {
> + struct rpmsg_device *rpdev;
> + struct completion xfer_ack;
> + struct work_struct host_event_work;
> +};
> +
> +/**
> + * cros_ec_cmd_xfer_rpmsg - Transfer a message over rpmsg and receive the reply
> + *
> + * @ec_dev: ChromeOS EC device
> + * @ec_msg: Message to transfer
> + *
> + * This is only used for old EC proto version, and is not supported for this
> + * driver.
> + *
> + * Return: number of bytes of the reply on success or negative error code.
> + */
> +static int cros_ec_cmd_xfer_rpmsg(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *ec_msg)
> +{
> + return -EINVAL;
> +}
> +
> +/**
> + * cros_ec_pkt_xfer_rpmsg - Transfer a packet over rpmsg and receive the reply
> + *
> + * @ec_dev: ChromeOS EC device
> + * @ec_msg: Message to transfer
> + *
> + * Return: number of bytes of the reply on success or negative error code.
> + */
> +static int cros_ec_pkt_xfer_rpmsg(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *ec_msg)
> +{
> + struct ec_host_response *response;
> + struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
> + struct rpmsg_device *rpdev = ec_rpmsg->rpdev;
> + int len;
> + u8 sum;
> + int ret;
> + int i;
> + unsigned long timeout;
> +
> + ec_msg->result = 0;
> + len = cros_ec_prepare_tx(ec_dev, ec_msg);
> + dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
> +
> + reinit_completion(&ec_rpmsg->xfer_ack);
> + ret = rpmsg_send(rpdev->ept, ec_dev->dout, len);
> + if (ret) {
> + dev_err(ec_dev->dev, "rpmsg send failed\n");
> + return ret;
> + }
> +
> + timeout = msecs_to_jiffies(EC_MSG_TIMEOUT_MS);
> + ret = wait_for_completion_timeout(&ec_rpmsg->xfer_ack, timeout);
> + if (!ret) {
> + dev_err(ec_dev->dev, "rpmsg send timeout\n");
> + return -EIO;
> + }
> +
> + /* check response error code */
> + response = (struct ec_host_response *)ec_dev->din;
> + ec_msg->result = response->result;
> +
> + ret = cros_ec_check_result(ec_dev, ec_msg);
> + if (ret)
> + goto exit;
> +
> + if (response->data_len > ec_msg->insize) {
> + dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
> + response->data_len, ec_msg->insize);
> + ret = -EMSGSIZE;
> + goto exit;
> + }
> +
> + /* copy response packet payload and compute checksum */
> + memcpy(ec_msg->data, ec_dev->din + sizeof(*response),
> + response->data_len);
> +
> + sum = 0;
> + for (i = 0; i < sizeof(*response) + response->data_len; i++)
> + sum += ec_dev->din[i];
> +
> + if (sum) {
> + dev_err(ec_dev->dev, "bad packet checksum, calculated %x\n",
> + sum);
> + ret = -EBADMSG;
> + goto exit;
> + }
> +
> + ret = response->data_len;
> +exit:
> + if (ec_msg->command == EC_CMD_REBOOT_EC)
> + msleep(EC_REBOOT_DELAY_MS);
> +
> + return ret;
> +}
> +
> +static void
> +cros_ec_rpmsg_host_event_function(struct work_struct *host_event_work)
> +{
> + struct cros_ec_rpmsg *ec_rpmsg = container_of(
> + host_event_work, struct cros_ec_rpmsg, host_event_work);
> + struct cros_ec_device *ec_dev = dev_get_drvdata(&ec_rpmsg->rpdev->dev);
> + bool wake_event = true;
> + int ret;
> +
> + ret = cros_ec_get_next_event(ec_dev, &wake_event);
> +
> + /*
> + * Signal only if wake host events or any interrupt if
> + * cros_ec_get_next_event() returned an error (default value for
> + * wake_event is true)
> + */
> + if (wake_event && device_may_wakeup(ec_dev->dev))
> + pm_wakeup_event(ec_dev->dev, 0);
> +
> + if (ret > 0)
> + blocking_notifier_call_chain(&ec_dev->event_notifier,
> + 0, ec_dev);
> +}
> +
> +static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
> + int len, void *priv, u32 src)
> +{
> + struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> + struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
> + struct cros_ec_rpmsg_response *resp;
> +
> + if (!len) {
> + dev_warn(ec_dev->dev, "rpmsg received empty response");

Is this is unlikely to happen?

> + return -EINVAL;
> + }
> +
> + resp = data;
> + len -= offsetof(struct cros_ec_rpmsg_response, data);
> + if (resp->type == HOST_COMMAND_MARK) {
> + if (len > ec_dev->din_size) {
> + dev_warn(
> + ec_dev->dev,
> + "received length %d > din_size %d, truncating",
> + len, ec_dev->din_size);

How often this warning appears? Should be this a dev_dbg?

> + len = ec_dev->din_size;
> + }
> +
> + memcpy(ec_dev->din, resp->data, len);
> + complete(&ec_rpmsg->xfer_ack);
> + } else if (resp->type == HOST_EVENT_MARK) {
> + schedule_work(&ec_rpmsg->host_event_work);
> + } else {
> + dev_warn(ec_dev->dev, "rpmsg received invalid type = %d",
> + resp->type);

Is this is unlikely to happen?

> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev)
> +{
> + struct device *dev = &rpdev->dev;
> + struct cros_ec_device *ec_dev;
> + struct cros_ec_rpmsg *ec_rpmsg;
> + int ret;
> +
> + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
> + if (!ec_dev)
> + return -ENOMEM;
> +
> + ec_rpmsg = devm_kzalloc(dev, sizeof(*ec_rpmsg), GFP_KERNEL);
> + if (!ec_rpmsg)
> + return -ENOMEM;
> +
> + ec_dev->dev = dev;
> + ec_dev->priv = ec_rpmsg;
> + ec_dev->cmd_xfer = cros_ec_cmd_xfer_rpmsg;
> + ec_dev->pkt_xfer = cros_ec_pkt_xfer_rpmsg;
> + ec_dev->phys_name = dev_name(&rpdev->dev);
> + ec_dev->din_size = sizeof(struct ec_host_response) +
> + sizeof(struct ec_response_get_protocol_info);
> + ec_dev->dout_size = sizeof(struct ec_host_request);
> + dev_set_drvdata(dev, ec_dev);
> +
> + ec_rpmsg->rpdev = rpdev;
> + init_completion(&ec_rpmsg->xfer_ack);
> + INIT_WORK(&ec_rpmsg->host_event_work,
> + cros_ec_rpmsg_host_event_function);
> +
> + ret = cros_ec_register(ec_dev);
> + if (ret) {
> + dev_err(dev, "cannot register EC\n");
> + return ret;
> + }
> +
> + return 0;

cros_ec_register returns 0 on success and prints an error message if
something went wrong. Remove the above and just do:

return cros_ec_register(ec_dev);


> +}
> +
> +static void cros_ec_rpmsg_remove(struct rpmsg_device *rpdev)
> +{
> + struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> + struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
> +
> + cancel_work_sync(&ec_rpmsg->host_event_work);
> +}
> +
> +static const struct of_device_id cros_ec_rpmsg_of_match[] = {
> + { .compatible = "google,cros-ec-rpmsg", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, cros_ec_rpmsg_of_match);
> +
> +static struct rpmsg_driver cros_ec_driver_rpmsg = {
> + .drv = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = cros_ec_rpmsg_of_match,
> + },
> + .probe = cros_ec_rpmsg_probe,
> + .remove = cros_ec_rpmsg_remove,
> + .callback = cros_ec_rpmsg_callback,
> +};
> +
> +module_rpmsg_driver(cros_ec_driver_rpmsg);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("ChromeOS EC multi function device (rpmsg)");
> --
> 2.21.0.392.gf8f6787159e-goog
>