[PATCH] usb: xhci: inherit dma_mask from bus if set correctly

[Pankaj Dubey]

From: Sriram Dash <sriram.dash@xxxxxxxxxxx>

The xhci forcefully converts the dma_mask to either 64 or 32 and the
dma-mask set by the bus is somewhat ignored. If the platform  sets the
correct dma_mask, then respect that.

Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Signed-off-by: Sriram Dash <sriram.dash@xxxxxxxxxxx>
---
 drivers/usb/host/xhci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 005e659..55cf89e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5119,6 +5119,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
 	}
 
+	/*
+	 * A platform may require coherent masks other than 64/32 bit, and we
+	 * should respect that. If the firmware has already requested for a
+	 * dma-range, we inherit the dma_mask presuming the platform knows
+	 * what it is doing.
+	 */
+
+	if (dev->bus_dma_mask)
+		dma_set_mask_and_coherent(dev, dev->bus_dma_mask);
+
 	xhci_dbg(xhci, "Calling HCD init\n");
 	/* Initialize HCD and host controller data structures. */
 	retval = xhci_init(hcd);
-- 
2.7.4