[PATCH v5 2/5] dt-bindings: phy: add binding for Allwinner USB3 PHY

From: Icenowy Zheng
Date: Fri Apr 05 2019 - 16:58:01 EST


The new Allwinner H6 SoC contains a USB3 PHY that is wired to the
external USB3 pins of the SoC.

Add a device tree binding for the PHY.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
Changes in v5:
- Dropped Vbus regulator and added connector subnode.

Changes in v4:
- Changed Vbus regulator property to vbus-supply.

Changes in v3:
- Added Chen-Yu's Review tag.

No changes in v2, v1.

.../bindings/phy/sun50i-usb3-phy.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
new file mode 100644
index 000000000000..eeedc53e6360
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
@@ -0,0 +1,28 @@
+Allwinner sun50i USB3 PHY
+-----------------------
+
+Required properties:
+- compatible : should be one of
+ * allwinner,sun60i-h6-usb3-phy
+- reg : a list of offset + length pairs
+- #phy-cells : from the generic phy bindings, must be 0
+- clocks : phandle + clock specifier for the phy clock
+- resets : phandle + reset specifier for the phy reset
+
+Optional nodes:
+- connector : A sub-node required for representing the connector connected
+ to the USB PHY. See ../connector/usb-connector.txt for details.
+
+Example:
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+
+ connector {
+ compatible = "usb-a-connector";
+ label = "USB3";
+ };
+ };
--
2.18.1