Re: [PATCH v2] usb: host: xhci: Support running urb giveback in tasklet context

From: Suwan Kim
Date: Mon Apr 08 2019 - 10:26:50 EST


On Thu, Apr 04, 2019 at 04:54:26PM -0400, Alan Stern wrote:
> On Thu, 4 Apr 2019, Suwan Kim wrote:
>
> > Hi Alan,
> >
> > On Mon, Apr 01, 2019 at 10:43:24AM -0400, Alan Stern wrote:
> > > On Mon, 1 Apr 2019, Suwan Kim wrote:
> > >
> > > > Patch "USB: HCD: support giveback of URB in tasklet context"[1]
> > > > introduced giveback of urb in tasklet context. [1] This patch was
> > > > applied to ehci but not xhci. [2] This patch significantly reduces
> > > > the hard irq time of xhci. Especially for uvc driver, the hard irq
> > > > including the uvc completion function runs quite long but applying
> > > > this patch reduces the hard irq time of xhci.
> > >
> > > Please read the kerneldoc for usb_submit_urb() and usb_kill_urb(), in
> > > particular, the parts that describe how isochronous URBs are treated.
> > > Can you guarantee that with this patch applied, xhci-hcd will continue
> > > to work as the kerneldoc describes?
> > >
> >
> > I read the description of usb_submit_urb() and usb_kill_urb() and i
> > think that xhci-hcd with which this patch is applied works as the
> > description of usb_submit_urb() and usb_kill_urb().
> >
> > In the case of usb_submit_urb(), xhci spec 4.10.3.1 "Ring Overrun and
> > Underrun" describes the behavior of xhci when an isochronous ring is
> > empty due to the late URB submission in driver. (In this patch, empty
> > isochronous ring can happen due to tasklet scheduling delay in URB
> > complete function which calls the next usb_submit_urb())
> >
> > According to the xhci spec, xHC deals with a late isochronous URB
> > according to the SIA(Start Isoch ASAP) flag of TRB and SIA flag is
> > set according to URB_ISO_ASAP flag in xhci_queue_isoc_tx().
> >
> > If the SIA flag is set, xHC will schedule the late isochronous URB in
> > the next "Endpoint Service Interval Time" (next available frame) and
> > transmits ischronous URB in that frame.
> >
> > If the SIA flag is cleared (URB_ISO_ASAP flag is cleared), xHC generates
> > "Missed Service Error" event and skips the late isochronous URB and
> > doen't transmit it. When the interrupt handler (xhci_irq) receives
> > "Missed Service Error" event, it returns the late isochronous URB to
> > the driver calling usb_hcd_giveback_urb() with -EXDEV error code in
> > usb_iso_packet_descriptor->status at skip_isoc_td(). So xhci behavior
> > about the late isochronous URB in spec and implementation is same
> > with the description of usb_submit_urb().
> >
> > In the case of usb_kill_urb(), description says that it waits until
> > the URB complete function finishes and the important point is that
> > whether the USB complete function is called early or late doesn't
> > affect the behavior of usb_kill_urb() because __usb_hcd_giveback_urb()
> > wakes up usb_kill_urb() after calling URB complete function.
> > So, pending a URB complete function in tasklet doesn't affect the
> > behavior of xhci in usb_kill_urb().
>
> Okay, good. I just wanted to make sure you were aware of the issues
> and had checked that using tasklets wouldn't cause any problems.

Yes, isochronous issue is very important point in this patch.
Thank you for your feedback Alan.


Mathias,

Could i receive your feedback for this patch?
Do i need more tests for SS devices or other types of tests?

Regards

Suwan Kim