[PATCH v3 4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx

From: Bartosz Golaszewski
Date: Tue Apr 09 2019 - 04:29:10 EST


From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

Instead of directly using the vbus GPIO we should model it as a fixed
regulator. Add all necessary fix-ups for the regulator to be registered
and configure the vbus GPIO as its enable pin.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
arch/arm/mach-davinci/board-omapl138-hawk.c | 49 +++++++++++++++++++--
1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e244c8648594..db177a6a7e48 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -21,6 +21,7 @@
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>

#include <asm/mach-types.h>
@@ -298,15 +299,50 @@ static const short da850_hawk_usb11_pins[] = {
-1
};

-static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
+static struct regulator_consumer_supply hawk_usb_supplies[] = {
+ REGULATOR_SUPPLY("vbus", NULL),
+};
+
+static struct regulator_init_data hawk_usb_vbus_data = {
+ .consumer_supplies = hawk_usb_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies),
+};
+
+static struct fixed_voltage_config hawk_usb_vbus = {
+ .supply_name = "vbus",
+ .microvolts = 3300000,
+ .init_data = &hawk_usb_vbus_data,
+};
+
+static struct platform_device hawk_usb_vbus_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &hawk_usb_vbus,
+ },
+};
+
+static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
.dev_id = "ohci-da8xx",
.table = {
- GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
{ }
},
};

+static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
+ &hawk_usb_oc_gpio_lookup,
+ &hawk_usb_vbus_gpio_lookup,
+};
+
static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
/* TPS2087 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
@@ -327,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);

+ gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
+ ARRAY_SIZE(hawk_usb_gpio_lookups));
+
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);

- gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
+ ret = platform_device_register(&hawk_usb_vbus_device);
+ if (ret) {
+ pr_warn("%s: Unable to register the vbus supply\n", __func__);
+ return;
+ }

ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
if (ret)
--
2.21.0