[PATCH V11 4/4] arm64: dts: imx: add i.MX8QXP thermal support

[Anson Huang]

Add i.MX8QXP CPU thermal zone support.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V10:
	- remove property "imx,sensor-resource-id" and put HW resource ID inside each
	  thermal-sensors' phandle argument.
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 ++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 70ef3db..cc1d877 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -149,6 +150,11 @@
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	timer {
@@ -484,4 +490,31 @@
 			power-domains = <&pd IMX_SC_R_GPIO_7>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
-- 
2.7.4