Re: [PATCH] clk: rockchip: Fix video codec clocks on rk3288

From: elaine.zhang
Date: Wed Apr 10 2019 - 21:18:05 EST


å 2019/4/11 äå7:37, Doug Anderson åé:

On Wed, Apr 10, 2019 at 11:38 AM Jonas Karlman <jonas@xxxxxxxxx> wrote:
On 2019-04-10 17:45, Doug Anderson wrote:

On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
It appears that there is a typo in the rk3288 TRM. For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's
the other way around.

How do I know? Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
using the new muxgrf type on rk3288") we always pretended that we
were using "aclk_vdpu" and the comment in the code said that this
matched the default setting in the system. In fact the default
setting is 0 according to the TRM and according to reading memory
at bootup. In addition rk3288-based Chromebooks ran like this and
the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
on the command line), you get errors like "failed to get ack on
domain 'pd_video', val=0x80208". After flipping vepu/vdpu things
init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
for RK3288_PD_VIDEO I can get past the power domain errors, but now
I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
and probes OK showing that somehow the "vdpu" was important to keep
enabled. This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
"aclk_vepu" using assigned-clocks and the video codec still probes

Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
I currently have no way to test the JPEG mem2mem driver, so hopefully
others can test this and make sure it's happy for them. I'm just
happy not to get strange errors at boot anymore.

drivers/clk/rockchip/clk-rk3288.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Any thoughts about this patch? I'm 99.9% certain it's correct and
it'd be nice to get it landed. Heiko: I assume you're still
collecting Rockchip clock patches and would be the one to apply it and
(at some point) send a pull request to the clock tree?

This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the
rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1].

Also note that the same change was suggested in a previous patch [2] from by ayaka.

If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2,
that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver.

Thanks for the pointers! Now I'm 99.9999% certain that my patch is
correct instead of just 99.9%. ;-)

IMO the CLK_SET_RATE_PARENT should probably be a separate patch but it
does seem like we need it. ...and actually the patch adding it should
have a Fixes tag of the same commit. Prior to that commit the parent
of "aclk_vcodec" was "aclk_vdpu". As a gate clock it would
automatically have CLK_SET_RATE_PARENT so you could easily set the
rate. ...and it looks as if the downstream video codec driver in
Chrome OS relies on this too.

I'm happy to add that in a v2 if Heiko is happy with it.

I also agree with this modification, which is completely correct. Thank you for your modification.

(We didn't push for this change because the GRF_SOC_CON0[7] is setting in vcodec driver(RK mainline branch))