Re: some trouble when using vrf
From: Mike Manning
Date: Tue Apr 16 2019 - 08:49:56 EST
On 16/04/2019 12:26, linmiaohe wrote:
> Hi all:
> I meet some trouble when using vrf, it's very nice of you if you
> can help me fix it.
> 1.If I bind a vrf address before I set SO_BINDTODEVICE opts to bind an
> enslaved device, "Cannot assign requested address" will occurs. It's
> because only after we set SO_BINDTODEVICE opts to bind an enslaved device,
> then we can lookup the route in the specified l3mdev domain.
> I think we couldn't limit the order of bind ip addr and SO_BINDTODEVICE opts
> otherwise many vrf unaware apps many need to change their code.
> I can't find a convenient way to fix it.Here is an example:
> bind(sock_fd, (struct sockaddr *)&addr_serv, sizeof(addr_serv));
> ret = setsockopt(sock_fd, SOL_SOCKET, SO_BINDTODEVICE, bind_dev, strlen(bind_dev)+1);
> This code snipet doesn't work if the ip address of addr_serv is not in default vrf. And
> "Cannot assign requested address" will occurs.
Or you can run instances of vrf-unaware applications per VRF with 'sudo
ip vrf exec <vrf> <cmd>', with the 3 sysctl you indicate below set to 0.
> 2.When I run a udp server in default vrf and set net.ipv4.udp_l3mdev_accept=1,
> it's supposed to work accorss VRFs.
> But it occurs when udp server received a packet, it sends back with the source
> ip address from default vrf which is supposed to from the specified l3mdev domain.
> And the connection between server and client is broken. It's because udp server
> run in default vrf and doesn't bind the enslaved device, so only the route table in
> default vrf is avaliable.
> For example,I run a udp server in default vrf and set net.ipv4.udp_l3mdev_accept=1:
> [root@localhost vrf]# sysctl -a | grep l3mdev
> net.ipv4.raw_l3mdev_accept = 1
> net.ipv4.tcp_l3mdev_accept = 1
> net.ipv4.udp_l3mdev_accept = 1
> Then connect the server and send a udp packet to the specified vrf. Here is tcpdump output:
> 17:28:54.925417 IP 10.0.0.2.43003 > 10.0.0.1.irdmi: UDP, length 17
> 17:28:54.925953 IP 220.127.116.11.irdmi > 10.0.0.2.43003: UDP, length 17
> ps. 10.0.0.2 is client ip, 10.0.0.1 is specified vrf ip, and 18.104.22.168 is default vrf ip.
> 10.0.0.1 and 22.214.171.124 are in the same host.
> Thanks a lot if you can help me fix these. Have a nice day.