[PATCH net-next 1/2] net: stmmac: dwxgmac: Finish the Flow Control implementation

[Jose Abreu]

Finish the implementation of Flow Control feature. In order for it to
work correctly we need to set EHFC bit and the correct threshold values
for activating and deactivating it.

Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: Joao Pinto <jpinto@xxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |  5 +++
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 46 ++++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 37d5e6fe7473..085b700a4994 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -143,6 +143,11 @@
 #define XGMAC_RSF			BIT(5)
 #define XGMAC_RTC			GENMASK(1, 0)
 #define XGMAC_RTC_SHIFT			0
+#define XGMAC_MTL_RXQ_FLOW_CONTROL(x)	(0x00001150 + (0x80 * (x)))
+#define XGMAC_RFD			GENMASK(31, 17)
+#define XGMAC_RFD_SHIFT			17
+#define XGMAC_RFA			GENMASK(15, 1)
+#define XGMAC_RFA_SHIFT			1
 #define XGMAC_MTL_QINTEN(x)		(0x00001170 + (0x80 * (x)))
 #define XGMAC_RXOIE			BIT(16)
 #define XGMAC_MTL_QINT_STATUS(x)	(0x00001174 + (0x80 * (x)))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 2ba712b48a89..e79037f511e1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -147,6 +147,52 @@ static void dwxgmac2_dma_rx_mode(void __iomem *ioaddr, int mode,
 	value &= ~XGMAC_RQS;
 	value |= (rqs << XGMAC_RQS_SHIFT) & XGMAC_RQS;
 
+	if ((fifosz >= 4096) && (qmode != MTL_QUEUE_AVB)) {
+		u32 flow = readl(ioaddr + XGMAC_MTL_RXQ_FLOW_CONTROL(channel));
+		unsigned int rfd, rfa;
+
+		value |= XGMAC_EHFC;
+
+		/* Set Threshold for Activating Flow Control to min 2 frames,
+		 * i.e. 1500 * 2 = 3000 bytes.
+		 *
+		 * Set Threshold for Deactivating Flow Control to min 1 frame,
+		 * i.e. 1500 bytes.
+		 */
+		switch (fifosz) {
+		case 4096:
+			/* This violates the above formula because of FIFO size
+			 * limit therefore overflow may occur in spite of this.
+			 */
+			rfd = 0x03; /* Full-2.5K */
+			rfa = 0x01; /* Full-1.5K */
+			break;
+
+		case 8192:
+			rfd = 0x06; /* Full-4K */
+			rfa = 0x0a; /* Full-6K */
+			break;
+
+		case 16384:
+			rfd = 0x06; /* Full-4K */
+			rfa = 0x12; /* Full-10K */
+			break;
+
+		default:
+			rfd = 0x06; /* Full-4K */
+			rfa = 0x1e; /* Full-16K */
+			break;
+		}
+
+		flow &= ~XGMAC_RFD;
+		flow |= rfd << XGMAC_RFD_SHIFT;
+
+		flow &= ~XGMAC_RFA;
+		flow |= rfa << XGMAC_RFA_SHIFT;
+
+		writel(flow, ioaddr + XGMAC_MTL_RXQ_FLOW_CONTROL(channel));
+	}
+
 	writel(value, ioaddr + XGMAC_MTL_RXQ_OPMODE(channel));
 
 	/* Enable MTL RX overflow */
-- 
2.7.4