Re: [PATCH v1 2/3] MIPS: ath79: ar9331: add Ethernet nodes

[Sergei Shtylyov]

Hello!

On 17.04.2019 9:22, Oleksij Rempel wrote:

> Add ethernet nodes supported by ag71xx driver.
>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>   arch/mips/boot/dts/qca/ar9331.dtsi           | 25 ++++++++++++++++++++
>   arch/mips/boot/dts/qca/ar9331_dpt_module.dts |  8 +++++++
>   2 files changed, 33 insertions(+)
>
> diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
> index 2bae201aa365..7d59c7c66dda 100644
> --- a/arch/mips/boot/dts/qca/ar9331.dtsi
> +++ b/arch/mips/boot/dts/qca/ar9331.dtsi
> @@ -116,6 +116,31 @@
>   			};
>   		};
>   
> +		eth0: eth@19000000 {

   The name should be "ethernet@...> according to the DT spec.

> +			status = "disabled";

   Mmm, this one is typically specified last in the node.

> +
> +			compatible = "qca,ar9330-eth";
> +			reg = <0x19000000 0x200>;
> +			interrupts = <4>;
> +
> +			resets = <&rst 9>;
> +			reset-names = "mac";
> +		};
> +
> +		eth1: eth@1a000000 {

   "ethernet@..." again.

> +			status = "disabled";
> +
> +			compatible = "qca,ar9330-eth";
> +			reg = <0x1a000000 0x200>;
> +			interrupts = <5>;
> +
> +			resets = <&rst 13>, <&rst 23>;
> +			reset-names = "mac", "mdio";
> +
> +			clocks = <&pll ATH79_CLK_MDIO>;
> +			clock-names = "mdio";
> +		};
> +
>   		usb: usb@1b000100 {
>   			compatible = "chipidea,usb2";
>   			reg = <0x1b000000 0x200>;
[...]

MBR, Sergei