RE: [PATCH 1/7] net: stmmac: add EHL SGMII 1Gbps platform data and PCI ID

[Voon, Weifeng]

> Added EHL SGMII 1Gbps PCI ID. Different MII and speed will have different
> PCI ID.
> For EHL, default TX and RX FIFO size is set to 32KB. This is because the FIFO
> size advertised in the HW features is not the same as the HW
> implementation. The TX FIFO is shared among all all the TX queues and the
> RX FIFO is also shared among all the RX queues.
> 
> Signed-off-by: Weifeng Voon <weifeng.voon@xxxxxxxxx>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 103
> +++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> index d819e8e..b454a97 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
> @@ -118,6 +118,107 @@ static int stmmac_default_data(struct pci_dev
> *pdev,
>  	.setup = stmmac_default_data,
>  };
> 
> +static int ehl_common_data(struct pci_dev *pdev,
> +			   struct plat_stmmacenet_data *plat) {
> +	int i;
> +
> +	plat->bus_id = 1;
> +	plat->phy_addr = 0;
> +	plat->clk_csr = 5;
> +	plat->has_gmac = 0;
> +	plat->has_gmac4 = 1;
> +	plat->force_sf_dma_mode = 0;
> +	plat->tso_en = 1;
> +
> +	plat->rx_queues_to_use = 8;
> +	plat->tx_queues_to_use = 8;
> +	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
> +
> +	for (i = 0; i < plat->rx_queues_to_use; i++) {
> +		plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
> +		plat->rx_queues_cfg[i].chan = i;
> +
> +		/* Disable Priority config by default */
> +		plat->tx_queues_cfg[i].use_prio = false;
> +
> +		/* Disable RX queues routing by default */
> +		plat->rx_queues_cfg[i].pkt_route = 0x0;
> +	}
> +
> +	for (i = 0; i < plat->tx_queues_to_use; i++) {
> +		plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
> +
> +		/* Disable Priority config by default */
> +		plat->tx_queues_cfg[i].use_prio = false;
> +	}
> +
> +	plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
> +	plat->tx_queues_cfg[0].weight = 0x09;
> +	plat->tx_queues_cfg[1].weight = 0x0A;
> +	plat->tx_queues_cfg[2].weight = 0x0B;
> +	plat->tx_queues_cfg[3].weight = 0x0C;
> +	plat->tx_queues_cfg[4].weight = 0x0D;
> +	plat->tx_queues_cfg[5].weight = 0x0E;
> +	plat->tx_queues_cfg[6].weight = 0x0F;
> +	plat->tx_queues_cfg[7].weight = 0x10;
> +
> +	plat->mdio_bus_data->phy_reset = NULL;
> +	plat->mdio_bus_data->phy_mask = 0;
> +
> +	plat->dma_cfg->pbl = 32;
> +	plat->dma_cfg->pblx8 = true;
> +	plat->dma_cfg->fixed_burst = 0;
> +	plat->dma_cfg->mixed_burst = 0;
> +	plat->dma_cfg->aal = 0;
> +
> +	plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi),
> +				 GFP_KERNEL);
> +	if (!plat->axi)
> +		return -ENOMEM;
> +	plat->axi->axi_lpi_en = 0;
> +	plat->axi->axi_xit_frm = 0;
> +	plat->axi->axi_wr_osr_lmt = 0;
> +	plat->axi->axi_rd_osr_lmt = 2;
> +	plat->axi->axi_blen[0] = 4;
> +	plat->axi->axi_blen[1] = 8;
> +	plat->axi->axi_blen[2] = 16;
> +
> +	/* Set default value for multicast hash bins */
> +	plat->multicast_filter_bins = HASH_TABLE_SIZE;
> +
> +	/* Set default value for unicast filter entries */
> +	plat->unicast_filter_entries = 1;
> +
> +	/* Set the maxmtu to a default of JUMBO_LEN */
> +	plat->maxmtu = JUMBO_LEN;
> +
> +	plat->tx_fifo_size = 32768;
> +	plat->rx_fifo_size = 32768;
> +
> +	return 0;
> +}
> +
> +static int ehl_sgmii1g_data(struct pci_dev *pdev,
> +			    struct plat_stmmacenet_data *plat) {
> +	int ret;
> +
> +	/* Set common default data first */
> +	ret = ehl_common_data(pdev, plat);
> +
> +	if (ret)
> +		return ret;
> +
> +	plat->interface = PHY_INTERFACE_MODE_SGMII;
> +
> +	return 0;
> +}
> +
> +static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
> +	.setup = ehl_sgmii1g_data,
> +};
> +
>  static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
>  	{
>  		.func = 6,
> @@ -355,6 +456,7 @@ static int __maybe_unused
> stmmac_pci_resume(struct device *dev)
> 
>  #define STMMAC_QUARK_ID  0x0937
>  #define STMMAC_DEVICE_ID 0x1108
> +#define STMMAC_EHL_SGMII1G_ID   0x4b31
> 
>  #define STMMAC_DEVICE(vendor_id, dev_id, info)	{	\
>  	PCI_VDEVICE(vendor_id, dev_id),			\
> @@ -365,6 +467,7 @@ static int __maybe_unused
> stmmac_pci_resume(struct device *dev)
>  	STMMAC_DEVICE(STMMAC, STMMAC_DEVICE_ID,
> stmmac_pci_info),
>  	STMMAC_DEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_MAC,
> stmmac_pci_info),
>  	STMMAC_DEVICE(INTEL, STMMAC_QUARK_ID, quark_pci_info),
> +	STMMAC_DEVICE(INTEL, STMMAC_EHL_SGMII1G_ID,
> ehl_sgmii1g_pci_info),
>  	{}
>  };
> 
> --
> 1.9.1

++ stmmac maintainers and c45 experts