Re: [PATCH V5 10/16] dt-bindings: PCI: tegra: Add device tree support for T194

[Thierry Reding]

On Wed, Apr 24, 2019 at 10:49:58AM +0530, Vidya Sagar wrote:
> Add support for Tegra194 PCIe controllers. These controllers are based
> on Synopsys DesignWare core IP.
> 
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> Changes since [v4]:
> * None
> 
> Changes since [v3]:
> * None
> 
> Changes since [v2]:
> * Using only 'Cx' (x-being controller number) format to represent a controller
> * Changed to 'value: description' format where applicable
> * Changed 'nvidia,init-speed' to 'nvidia,init-link-speed'
> * Provided more documentation for 'nvidia,init-link-speed' property
> * Changed 'nvidia,pex-wake' to 'nvidia,wake-gpios'
> 
> Changes since [v1]:
> * Added documentation for 'power-domains' property
> * Removed 'window1' and 'window2' properties
> * Removed '_clk' and '_rst' from clock and reset names
> * Dropped 'pcie' from phy-names
> * Added entry for BPMP-FW handle
> * Removed offsets for some of the registers and added them in code and would be pickedup based on
>   controller ID
> * Changed 'nvidia,max-speed' to 'max-link-speed' and is made as an optional
> * Changed 'nvidia,disable-clock-request' to 'supports-clkreq' with inverted operation
> * Added more documentation for 'nvidia,update-fc-fixup' property
> * Removed 'nvidia,enable-power-down' and 'nvidia,plat-gpios' properties
> * Added '-us' to all properties that represent time in microseconds
> * Moved P2U documentation to a separate file
> 
>  .../bindings/pci/nvidia,tegra194-pcie.txt     | 187 ++++++++++++++++++
>  1 file changed, 187 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> 
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> new file mode 100644
> index 000000000000..208dff126108
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> @@ -0,0 +1,187 @@
> +NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
> +
> +This PCIe host controller is based on the Synopsis Designware PCIe IP
> +and thus inherits all the common properties defined in designware-pcie.txt.
> +
> +Required properties:
> +- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie".
> +- device_type: Must be "pci"
> +- power-domains: A phandle to the node that controls power to the respective
> +  PCIe controller and a specifier name for the PCIe controller. Following are
> +  the specifiers for the different PCIe controllers
> +    TEGRA194_POWER_DOMAIN_PCIEX8B: C0
> +    TEGRA194_POWER_DOMAIN_PCIEX1A: C1
> +    TEGRA194_POWER_DOMAIN_PCIEX1A: C2
> +    TEGRA194_POWER_DOMAIN_PCIEX1A: C3
> +    TEGRA194_POWER_DOMAIN_PCIEX4A: C4
> +    TEGRA194_POWER_DOMAIN_PCIEX8A: C5
> +  these specifiers are defined in
> +  "include/dt-bindings/power/tegra194-powergate.h" file.
> +- reg: A list of physical base address and length for each set of controller

Perhaps "list of physical base address and length pairs".

> +  registers. Must contain an entry for each entry in the reg-names property.
> +- reg-names: Must include the following entries:
> +  "appl": Controller's application logic registers
> +  "config": As per the definition in designware-pcie.txt
> +  "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
> +             Translation Unit) registers of the PCIe core are made available
> +             fow SW access.

s/fow/for/

Thierry

Attachment: signature.asc
Description: PGP signature