[PATCH v1 1/3] drm/tegra: dc: Tune up high priority request controls on Tegra20

From: Dmitry Osipenko
Date: Sun May 05 2019 - 13:40:30 EST


Tegra20 has a high priority request control that allow to configure
when display's memory client should perform read requests with a higher
priority (Tegra30+ uses other means). Set up the controls for a more
aggressive prefetching to reliably avoid FIFO underflow on a lower memory
frequency, this allow to safely drop the memory bandwidth requirement by
about two times in a most popular cases (only one display active, video
overlay inactive, no scaling is done).

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/gpu/drm/tegra/dc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 607a6ea17ecc..cf622a07e9b6 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -1833,12 +1833,12 @@ static void tegra_crtc_atomic_enable(struct drm_crtc *crtc,
tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);

/* initialize timer */
- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
- WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x70) |
+ WINDOW_B_THRESHOLD(0x30) | WINDOW_C_THRESHOLD(0x70);
tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);

- value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
- WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
+ value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0) |
+ WINDOW_B_THRESHOLD(0) | WINDOW_C_THRESHOLD(0);
tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);

value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
--
2.21.0