[PATCH v3 02/14] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"

[Robin Gong]

  There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32a3' firstly.

Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bc..a90f217 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,7 +339,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -353,7 +353,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -367,7 +367,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -381,7 +381,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.4