[PATCH v3 0/4] Add reset controller support for BM1880 SoC
From: Manivannan Sadhasivam
Date: Fri May 10 2019 - 14:47:08 EST
This patchset adds reset controller support for Bitmain BM1880 SoC.
BM1880 SoC has only one reset controller and the reset-simple driver
has been reused here.
This patchset has been tested on 96Boards Sophon Edge board.
Changes in v3:
* Removed the clk-rst part as it turned out be the clock gating register set.
Changes in v2:
As per review from Philipp:
* Reused reset_simple_active_low struct instead of a new one for bm1880
* Splitted the SPDX license change to a separate commit
* Added Reviewed-by tags from Rob and Philipp
Manivannan Sadhasivam (4):
dt-bindings: reset: Add devicetree binding for BM1880 reset controller
arm64: dts: bitmain: Add reset controller support for BM1880 SoC
reset: Add reset controller support for BM1880 SoC
reset: Switch to SPDX license identifier for reset-simple
.../bindings/reset/bitmain,bm1880-reset.txt | 18 +++++++
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 11 ++++
drivers/reset/Kconfig | 3 +-
drivers/reset/reset-simple.c | 8 ++-
.../dt-bindings/reset/bitmain,bm1880-reset.h | 51 +++++++++++++++++++
5 files changed, 85 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h