[DO NOT MERGE] [PATCH v9 9/9] arm64: dts: allwinner: oceanic-5205-5inmfd: Enable Microtech MTF050FHDI-03 panel

From: Jagan Teki
Date: Wed May 29 2019 - 07:00:50 EST


Microtech MTF050FHDI-03 is 1080x1920, 4-lane MIPI DSI LCD panel which
has inbuilt NT35596 IC chip.

DSI panel connected to board via 39-pin FPC port with,
- DLDO1 as VCC-DSI supply
- DLDO2 as DVDD supply
- DC1SW as AVDD supply
- DC1SW as AVEE supply
- PD24 gpio for reset pin
- PH10 gpio for backlight enable pin

Tested-by: Tamas Papp <tamas@xxxxxxxxx>
Signed-off-by: Ryan Pannell <ryan@xxxxxxxxx>
Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
.../sun50i-a64-oceanic-5205-5inmfd.dts | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index a4ddc0b9664c..ab9ee10ba6a2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -8,6 +8,7 @@
/dts-v1/;

#include "sun50i-a64-sopine.dtsi"
+#include <dt-bindings/pwm/pwm.h>

/ {
model = "Oceanic 5205 5inMFD";
@@ -22,6 +23,15 @@
stdout-path = "serial0:115200n8";
};

+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <412 512>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PH10 */
+ };
+
can_osc: can-osc {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -40,6 +50,29 @@
};
};

+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <&reg_dldo1>; /* VCC-DSI */
+ status = "okay";
+
+ panel@0 {
+ compatible = "microtech,mtf050fhdi-03", "novatek,nt35596";
+ reg = <0>;
+ dvdd-supply = <&reg_dldo2>; /* VCC-MIPI */
+ avdd-supply = <&reg_dc1sw>; /* AVDD_5V0 */
+ avee-supply = <&reg_dc1sw>; /* AVEE_5V */
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -81,10 +114,26 @@
status = "okay";
};

+&r_pwm {
+ status = "okay";
+};
+
&reg_dc1sw {
regulator-name = "vcc-phy";
};

+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-dsi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-mipi";
+};
+
&reg_ldo_io0 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
--
2.18.0.321.gffc6fa0e3