[PATCH v2 1/1] Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h

From: Michael Kelley
Date: Wed May 29 2019 - 20:18:00 EST


Break out parts of mshyperv.h that are ISA independent into a
separate file in include/asm-generic. This move facilitates
ARM64 code reusing these definitions and avoids code
duplication. No functionality or behavior is changed.

Signed-off-by: Michael Kelley <mikelley@xxxxxxxxxxxxx>
Reviewed-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
---
Changes in v2:
* Removed unneeded #includes in asm-generic/mshyperv.h;
added two #includes that are needed. [Vitaly Kuznetsov]

---

MAINTAINERS | 1 +
arch/x86/include/asm/mshyperv.h | 147 +-------------------------------
include/asm-generic/mshyperv.h | 180 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+), 143 deletions(-)
create mode 100644 include/asm-generic/mshyperv.h

diff --git a/MAINTAINERS b/MAINTAINERS
index cf2a5b7..521192d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7308,6 +7308,7 @@ F: net/vmw_vsock/hyperv_transport.c
F: include/clocksource/hyperv_timer.h
F: include/linux/hyperv.h
F: include/uapi/linux/hyperv.h
+F: include/asm-generic/mshyperv.h
F: tools/hv/
F: Documentation/ABI/stable/sysfs-bus-vmbus

diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index f4fa8a9..2a793bf 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -3,84 +3,15 @@
#define _ASM_X86_MSHYPER_H

#include <linux/types.h>
-#include <linux/atomic.h>
#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/hyperv-tlfs.h>
#include <asm/nospec-branch.h>

-#define VP_INVAL U32_MAX
-
-struct ms_hyperv_info {
- u32 features;
- u32 misc_features;
- u32 hints;
- u32 nested_features;
- u32 max_vp_index;
- u32 max_lp_index;
-};
-
-extern struct ms_hyperv_info ms_hyperv;
-
-
typedef int (*hyperv_fill_flush_list_func)(
struct hv_guest_mapping_flush_list *flush,
void *data);

-/*
- * Generate the guest ID.
- */
-
-static inline __u64 generate_guest_id(__u64 d_info1, __u64 kernel_version,
- __u64 d_info2)
-{
- __u64 guest_id = 0;
-
- guest_id = (((__u64)HV_LINUX_VENDOR_ID) << 48);
- guest_id |= (d_info1 << 48);
- guest_id |= (kernel_version << 16);
- guest_id |= d_info2;
-
- return guest_id;
-}
-
-
-/* Free the message slot and signal end-of-message if required */
-static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
-{
- /*
- * On crash we're reading some other CPU's message page and we need
- * to be careful: this other CPU may already had cleared the header
- * and the host may already had delivered some other message there.
- * In case we blindly write msg->header.message_type we're going
- * to lose it. We can still lose a message of the same type but
- * we count on the fact that there can only be one
- * CHANNELMSG_UNLOAD_RESPONSE and we don't care about other messages
- * on crash.
- */
- if (cmpxchg(&msg->header.message_type, old_msg_type,
- HVMSG_NONE) != old_msg_type)
- return;
-
- /*
- * Make sure the write to MessageType (ie set to
- * HVMSG_NONE) happens before we read the
- * MessagePending and EOMing. Otherwise, the EOMing
- * will not deliver any more messages since there is
- * no empty slot
- */
- mb();
-
- if (msg->header.message_flags.msg_pending) {
- /*
- * This will cause message queue rescan to
- * possibly deliver another msg from the
- * hypervisor
- */
- wrmsrl(HV_X64_MSR_EOM, 0);
- }
-}
-
#define hv_init_timer(timer, tick) \
wrmsrl(HV_X64_MSR_STIMER0_COUNT + (2*timer), tick)
#define hv_init_timer_config(timer, val) \
@@ -97,6 +28,8 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)

#define hv_get_vp_index(index) rdmsrl(HV_X64_MSR_VP_INDEX, index)

+#define hv_signal_eom() wrmsrl(HV_X64_MSR_EOM, 0)
+
#define hv_get_synint_state(int_num, val) \
rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
#define hv_set_synint_state(int_num, val) \
@@ -122,13 +55,6 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
#define trace_hyperv_callback_vector hyperv_callback_vector
#endif
void hyperv_vector_handler(struct pt_regs *regs);
-void hv_setup_vmbus_irq(void (*handler)(void));
-void hv_remove_vmbus_irq(void);
-
-void hv_setup_kexec_handler(void (*handler)(void));
-void hv_remove_kexec_handler(void);
-void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
-void hv_remove_crash_handler(void);

/*
* Routines for stimer0 Direct Mode handling.
@@ -136,8 +62,6 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
*/
void hv_stimer0_vector_handler(struct pt_regs *regs);
void hv_stimer0_callback_vector(void);
-int hv_setup_stimer0_irq(int *irq, int *vector, void (*handler)(void));
-void hv_remove_stimer0_irq(int irq);

static inline void hv_enable_stimer0_percpu_irq(int irq) {}
static inline void hv_disable_stimer0_percpu_irq(int irq) {}
@@ -282,14 +206,6 @@ static inline u64 hv_do_rep_hypercall(u16 code, u16 rep_count, u16 varhead_size,
return status;
}

-/*
- * Hypervisor's notion of virtual processor ID is different from
- * Linux' notion of CPU ID. This information can only be retrieved
- * in the context of the calling CPU. Setup a map for easy access
- * to this information.
- */
-extern u32 *hv_vp_index;
-extern u32 hv_max_vp_index;
extern struct hv_vp_assist_page **hv_vp_assist_page;

static inline struct hv_vp_assist_page *hv_get_vp_assist_page(unsigned int cpu)
@@ -300,63 +216,8 @@ static inline struct hv_vp_assist_page *hv_get_vp_assist_page(unsigned int cpu)
return hv_vp_assist_page[cpu];
}

-/**
- * hv_cpu_number_to_vp_number() - Map CPU to VP.
- * @cpu_number: CPU number in Linux terms
- *
- * This function returns the mapping between the Linux processor
- * number and the hypervisor's virtual processor number, useful
- * in making hypercalls and such that talk about specific
- * processors.
- *
- * Return: Virtual processor number in Hyper-V terms
- */
-static inline int hv_cpu_number_to_vp_number(int cpu_number)
-{
- return hv_vp_index[cpu_number];
-}
-
-static inline int cpumask_to_vpset(struct hv_vpset *vpset,
- const struct cpumask *cpus)
-{
- int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
-
- /* valid_bank_mask can represent up to 64 banks */
- if (hv_max_vp_index / 64 >= 64)
- return 0;
-
- /*
- * Clear all banks up to the maximum possible bank as hv_tlb_flush_ex
- * structs are not cleared between calls, we risk flushing unneeded
- * vCPUs otherwise.
- */
- for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
- vpset->bank_contents[vcpu_bank] = 0;
-
- /*
- * Some banks may end up being empty but this is acceptable.
- */
- for_each_cpu(cpu, cpus) {
- vcpu = hv_cpu_number_to_vp_number(cpu);
- if (vcpu == VP_INVAL)
- return -1;
- vcpu_bank = vcpu / 64;
- vcpu_offset = vcpu % 64;
- __set_bit(vcpu_offset, (unsigned long *)
- &vpset->bank_contents[vcpu_bank]);
- if (vcpu_bank >= nr_bank)
- nr_bank = vcpu_bank + 1;
- }
- vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
- return nr_bank;
-}
-
void __init hyperv_init(void);
void hyperv_setup_mmu_ops(void);
-void hyperv_report_panic(struct pt_regs *regs, long err);
-void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
-bool hv_is_hyperv_initialized(void);
-void hyperv_cleanup(void);

void hyperv_reenlightenment_intr(struct pt_regs *regs);
void set_hv_tscchange_cb(void (*cb)(void));
@@ -379,8 +240,6 @@ static inline void hv_apic_init(void) {}

#else /* CONFIG_HYPERV */
static inline void hyperv_init(void) {}
-static inline bool hv_is_hyperv_initialized(void) { return false; }
-static inline void hyperv_cleanup(void) {}
static inline void hyperv_setup_mmu_ops(void) {}
static inline void set_hv_tscchange_cb(void (*cb)(void)) {}
static inline void clear_hv_tscchange_cb(void) {}
@@ -397,4 +256,6 @@ static inline int hyperv_flush_guest_mapping_range(u64 as,
}
#endif /* CONFIG_HYPERV */

+#include <asm-generic/mshyperv.h>
+
#endif
diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
new file mode 100644
index 0000000..0becb7d
--- /dev/null
+++ b/include/asm-generic/mshyperv.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Linux-specific definitions for managing interactions with Microsoft's
+ * Hyper-V hypervisor. The definitions in this file are architecture
+ * independent. See arch/<arch>/include/asm/mshyperv.h for definitions
+ * that are specific to architecture <arch>.
+ *
+ * Definitions that are specified in the Hyper-V Top Level Functional
+ * Spec (TLFS) should not go in this file, but should instead go in
+ * hyperv-tlfs.h.
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@xxxxxxxxxxxxx>
+ */
+
+#ifndef _ASM_GENERIC_MSHYPERV_H
+#define _ASM_GENERIC_MSHYPERV_H
+
+#include <linux/types.h>
+#include <linux/atomic.h>
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+#include <asm/ptrace.h>
+#include <asm/hyperv-tlfs.h>
+
+struct ms_hyperv_info {
+ u32 features;
+ u32 misc_features;
+ u32 hints;
+ u32 nested_features;
+ u32 max_vp_index;
+ u32 max_lp_index;
+};
+extern struct ms_hyperv_info ms_hyperv;
+
+extern u64 hv_do_hypercall(u64 control, void *inputaddr, void *outputaddr);
+extern u64 hv_do_fast_hypercall8(u16 control, u64 input8);
+
+
+/* Generate the guest OS identifier as described in the Hyper-V TLFS */
+static inline __u64 generate_guest_id(__u64 d_info1, __u64 kernel_version,
+ __u64 d_info2)
+{
+ __u64 guest_id = 0;
+
+ guest_id = (((__u64)HV_LINUX_VENDOR_ID) << 48);
+ guest_id |= (d_info1 << 48);
+ guest_id |= (kernel_version << 16);
+ guest_id |= d_info2;
+
+ return guest_id;
+}
+
+
+/* Free the message slot and signal end-of-message if required */
+static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
+{
+ /*
+ * On crash we're reading some other CPU's message page and we need
+ * to be careful: this other CPU may already had cleared the header
+ * and the host may already had delivered some other message there.
+ * In case we blindly write msg->header.message_type we're going
+ * to lose it. We can still lose a message of the same type but
+ * we count on the fact that there can only be one
+ * CHANNELMSG_UNLOAD_RESPONSE and we don't care about other messages
+ * on crash.
+ */
+ if (cmpxchg(&msg->header.message_type, old_msg_type,
+ HVMSG_NONE) != old_msg_type)
+ return;
+
+ /*
+ * The cmxchg() above does an implicit memory barrier to
+ * ensure the write to MessageType (ie set to
+ * HVMSG_NONE) happens before we read the
+ * MessagePending and EOMing. Otherwise, the EOMing
+ * will not deliver any more messages since there is
+ * no empty slot
+ */
+ if (msg->header.message_flags.msg_pending) {
+ /*
+ * This will cause message queue rescan to
+ * possibly deliver another msg from the
+ * hypervisor
+ */
+ hv_signal_eom();
+ }
+}
+
+void hv_setup_vmbus_irq(void (*handler)(void));
+void hv_remove_vmbus_irq(void);
+void hv_enable_vmbus_irq(void);
+void hv_disable_vmbus_irq(void);
+
+void hv_setup_kexec_handler(void (*handler)(void));
+void hv_remove_kexec_handler(void);
+void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
+void hv_remove_crash_handler(void);
+
+#if IS_ENABLED(CONFIG_HYPERV)
+/*
+ * Hypervisor's notion of virtual processor ID is different from
+ * Linux' notion of CPU ID. This information can only be retrieved
+ * in the context of the calling CPU. Setup a map for easy access
+ * to this information.
+ */
+extern u32 *hv_vp_index;
+extern u32 hv_max_vp_index;
+
+/* Sentinel value for an uninitialized entry in hv_vp_index array */
+#define VP_INVAL U32_MAX
+
+/**
+ * hv_cpu_number_to_vp_number() - Map CPU to VP.
+ * @cpu_number: CPU number in Linux terms
+ *
+ * This function returns the mapping between the Linux processor
+ * number and the hypervisor's virtual processor number, useful
+ * in making hypercalls and such that talk about specific
+ * processors.
+ *
+ * Return: Virtual processor number in Hyper-V terms
+ */
+static inline int hv_cpu_number_to_vp_number(int cpu_number)
+{
+ return hv_vp_index[cpu_number];
+}
+
+static inline int cpumask_to_vpset(struct hv_vpset *vpset,
+ const struct cpumask *cpus)
+{
+ int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
+
+ /* valid_bank_mask can represent up to 64 banks */
+ if (hv_max_vp_index / 64 >= 64)
+ return 0;
+
+ /*
+ * Clear all banks up to the maximum possible bank as hv_tlb_flush_ex
+ * structs are not cleared between calls, we risk flushing unneeded
+ * vCPUs otherwise.
+ */
+ for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
+ vpset->bank_contents[vcpu_bank] = 0;
+
+ /*
+ * Some banks may end up being empty but this is acceptable.
+ */
+ for_each_cpu(cpu, cpus) {
+ vcpu = hv_cpu_number_to_vp_number(cpu);
+ if (vcpu == VP_INVAL)
+ return -1;
+ vcpu_bank = vcpu / 64;
+ vcpu_offset = vcpu % 64;
+ __set_bit(vcpu_offset, (unsigned long *)
+ &vpset->bank_contents[vcpu_bank]);
+ if (vcpu_bank >= nr_bank)
+ nr_bank = vcpu_bank + 1;
+ }
+ vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
+ return nr_bank;
+}
+
+void hyperv_report_panic(struct pt_regs *regs, long err);
+void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
+bool hv_is_hyperv_initialized(void);
+void hyperv_cleanup(void);
+#else /* CONFIG_HYPERV */
+static inline bool hv_is_hyperv_initialized(void) { return false; }
+static inline void hyperv_cleanup(void) {}
+#endif /* CONFIG_HYPERV */
+
+#if IS_ENABLED(CONFIG_HYPERV)
+extern int hv_setup_stimer0_irq(int *irq, int *vector, void (*handler)(void));
+extern void hv_remove_stimer0_irq(int irq);
+#endif
+
+#endif
--
1.8.3.1